JVC KD-SX990 Radio Operations, Listening to the radio, Searching a station manually Manual search

RADIO OPERATIONS

ENGLISH

Listening to the radio	To stop searching before a station is
	received, press the same button you have
You can use either automatic searching or manual	pressed for searching.
searching to tune in to a particular station.

Searching a station automatically: Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

FM 1	FM 2	FM 3	A M
(F1)	(F2)	(F3)

Selected band appears*.

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

*When “CLOCK” is set to “ON” (see page 27), the current indication will soon change to the clock time.

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Start searching a station.

To search stations of higher frequencies

To search stations of lower frequencies

When a station is received, searching stops.

Searching a station manually:

Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as

	follows:
FM 1	FM 2	FM 3 A M
(F1)	(F2)	(F3)

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4

until “MANU” (manual) starts flashing on the display.

CONTINUED ON THE NEXT PAGE

9