Assigning names to the sources
You can assign names to station frequencies and CDs (both in this unit and in the CD changer). After assigning a name, it will appear on the display when you select the source.
Sources | Maximum number of | |
characters | ||
| ||
|
| |
Station frequencies | Up to 8 characters (up to | |
| 30 station frequencies | |
| including both FM and AM) | |
|
| |
CDs* | Up to 32 characters (up to |
40discs)
*You cannot assign a name to a CD Text or an MP3 disc.
1 Select a source you want to assign a name to.
When you select a source, the
power automatically comes
on.
2 While pressing DISP (display), press and hold SEL (select) for more than 2 seconds.
Ex.: When you select CD as the source
3 Select a character.
• See below for available characters.
4 Move the cursor to the next
(or previous) character position.
5
6 Finish the procedure while the last selected character is flashing.
To erase the entered characters
Insert spaces using the same procedure
described above.
Available characters
A | B | C | D | E | F | G | H | I | J |
|
|
|
|
|
|
|
|
|
|
K | L | M | N | O | P | Q | R | S | T |
|
|
|
|
|
|
|
|
|
|
U | V | W | X | Y | Z | 0 | 1 | 2 | 3 |
4 | 5 | 6 | 7 | 8 | 9 | – | / | < | > |
|
|
|
|
|
|
|
|
|
|
space
Notes:
•When you try to assign a name to the 41st disc, “NAME FULL” appears on the display. (In this case, delete unwanted names before assignment.)
•When the CD changer is connected, you can assign names to CDs in the CD changer. These names can also be shown on the display if you insert the CDs in this unit.
ENGLISH
29