power as possible without affecting
•Sleep — The menu display turns off. Buttons light and slowly fade in a raindrop pattern.
4.Use the right knob to set the
Transition Rate Units
You can select the units used to specify durations for various switcher transitions. Choose the units that you are most comfortable working with.
To select the units for switcher transitions:
1 | 3 |
|
2
1.Press MENU.
2.Press the PERS Wipe Pattern button.
3.Use the Rate knob to select the units used to specify switcher transition rates. You can choose from the following:
•Frames — Switcher transitions are specified in frames.
•Secnds — Switcher transitions are specified in seconds.
Double-Press Rate
You can set the
To set the switcher double press rate:
1 3 4
2
1.Press MENU.
2.Press the PERS Wipe Pattern button.
3.Press the DblPrs Speed knob.
4.
5.Press MENU to save the setting.
Resource Sharing
The switcher can only use one Chroma Key at a time. You can specify how the Chroma Key is shared between the keys on your switcher.
To specify Chroma Key resource sharing:
2
1 3
1.Press MENU.
2.Press the SYSTEM Wipe Pattern button.
3.Press the Rsrc Mode knob to display the Resource Mode menu.
4.Use the ChrKey knob to select how the Chroma Key resource is shared between keys. You can choose from the following:
•KEY1 — The Chroma Key is locked to Key 1. Only Key 1 can display a Chroma Key.
•KEY2 — The Chroma Key is locked to Key 2. Only Key 2 can display a Chroma Key.
•KEY3
•FLOAT — The Chroma Key can be used by any key. If a Chroma Key is
•ASK — The Chroma Key can be used by any key. If a Chroma Key is
5.Press the ChrKey knob to select the Chroma Key sharing mode.
6.Press the Confrm knob to commit the change. Press the Cancel knob to cancel the change.
14