JVC KM-H3000E, KM-H2500U, KM-H3000U, KM-H2500E manual GVG100 Supported Buttons

Table 8 GVG100 Supported Lamps

Name	MLE/Keyer	Byte Code	Notes
Positioner On	MLE	0x1C	Always on. Turning OFF results in a
			protocol error.
Reverse Wipe	MLE	0x1D
Dsk Preview	Keyer	0x1E	Always true. All Keyers show on Preview
			Turning OFF results in a protocol error.
Fade To Black	—	0x1F
Key Bus 0-9	Keyer	0x20-0x29	Turning OFF results in a protocol error.
Key Bus On Air	Keyer	0x2A	Turning OFF results in a protocol error.
Key Video Fill	Keyer	0x2F	Always true. Turning OFF results in a
			protocol error.
Wipe Type	MLE	0x30-0x39	Turning OFF results in a protocol error.
Key Invert	Keyer	0x40	DSKs. Turning OFF results in a protocol
			error.
Key Mask	Keyer	0x41	DSKs. Turning OFF results in a protocol
			error.
Key Autokey	Keyer	0x42	DSKs. Turning OFF results in a protocol
			error.
Key Selfkey	Keyer	0x43	DSKs. Turning OFF results in a protocol
			error.
Key Invert	Keyer	0x44	Turning OFF results in a protocol error.
Key Mask	Keyer	0x45	Turning OFF results in a protocol error.
Memory Mode Toggle	—	0x47	Toggles between memory and pattern
			modes.
Next Trans Is Bkgd	—	0x48	Turning OFF results in a protocol error.
Next Trans Is Key 1	—	0x49	Turning OFF results in a protocol error.
Cut	MLE	0x4A	Turning OFF results in a protocol error.
Key Selfkey	Keyer	0x4C	Turning OFF results in a protocol error.
Key Autokey	Keyer	0x4D	Turning OFF results in a protocol error.
Key Chromakey	Keyer	0x4E	Turning OFF results in a protocol error.
Editor Enable	—	0x4F	Editor control is always enabled. Turning
			OFF results in a protocol error.
Keyer Active	Keyer	0x52

Table 9 GVG100 Supported Buttons

Name	MLE/Keyer	Byte code	Notes
Program Bus 0-9	MLE	0x00-0x09
Autotrans	MLE	0x0B
Key Trans	Keyer	0x0C	DSKs
Key Cut	Keyer	0x0D	DSKs
Wipe Trans	MLE	0x0E
Dissolve Trans	MLE	0x0F
Preset Bus 0-9	MLE	0x10-0x19

47