To set the transition resume direction:
1 | 4 |
|
2 3
1.Press MENU.
2.Press the PERS Wipe Pattern button.
3.Press NEXT until Resume is displayed.
4.Use the Resume knob to set the transition direction used when a paused transition is
•Fwd — The transition completes as originally set.
•Rev — The transition reverses and the switcher returns to the
Next Transition Key Behavior
You can choose whether a Key remains in the Next Transition area or is removed if a dedicated key transition is performed.
To set the Next Transition Key behavior:
1 | 4 |
|
2 3
1.Press MENU.
2.Press the PERS Wipe Pattern button.
3.Press NEXT until ARKey is displayed.
4.Use the ARKey knob to set whether a Key remains or is removed from the Next transition area after a dedicated key transition is performed. You can choose from the following:
•Off — The Key is removed from the Next Transition area after a dedicated key transition is performed.
•On — The Key remains active in the Next Transition area after a dedicated key transition is performed.
16