ENGLISH
Other convenient tape functions
RPT
TAPE
Prohibiting cassette ejection
2 3
You can prohibit the cassette ejection and can “lock” a cassette in the cassette compartment. Press and hold TAPE 23 and 0 for more than 2 seconds. “NO EJECT” flashes on the display for about 5 seconds, and the cassette is “locked”.
To cancel the prohibition and “unlock” the cassette, press and hold TAPE 23and 0for more than 2 seconds again. “EJECT OK” flashes again for about 5 seconds, and this time the cassette is “unlock”.
Skipping the blank portions on the tape
You can skip blank portions between the tunes. (Blank Skip)
When this function is on, the unit skips blank portions of 15 seconds or more,
• See also “Changing the general settings” on page 26.
1.Press and hold SEL (select) for more than 2 seconds to call up the general settings mode.
2.Select “B.SKIP (blank skip)” with ¢or 4.
3.Select the desired mode with the control dial.
The Blank Skip mode alternates between on and off.
Note:
When the tape reaches its end while
Playing the current tune repeatedly
You can play the current tune repeatedly. (Repeat Play)
RPT
Each time you briefly press RPT while playing a tape, Repeat Play turns on and off alternately.
Lights up when Repeat Play is turned on
Press the RPT button while a tune you would like to hear over again is being played back. When the tape reaches the end of the tune, the tape is automatically rewound to the beginning of that tune and playback resumes from there. This operation will be repeated till the RPT button is pressed again.
Notes:
•In the following cases, Blank Skip and Repeat Play may not operate correctly:
–Tapes with tunes having long pianissimo passages (very quiet parts) or
–Tapes with short
20– Tapes with high level noise or humming between tunes.
– Tapes with tunes recorded at low recording levels.