Selecting the telephone muting
This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2”, whichever mutes the sounds from this unit.
When shipped from the factory, this mode is deactivated.
•MUTING 1: Select this if this setting can mute the sounds.
•MUTING 2: Select this if this setting can mute the sounds.
•OFF: Cancels the telephone muting.
1.Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2.Select “TEL” with 
¢or 
4.
3.Select “MUTING 1”, “MUTING 2” or “OFF” with the control dial. The telephone muting mode changes as follows:
MUTING 1 
MUTING 2 
OFF 
Selecting the external component to use (ONLY FOR
You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor
To use the external component as the playback source through this unit, you need to select which component — CD changer or external component — to use. When shipped from the factory, CD changer is selected as the external component.
• LINE IN: To use the extenal component other than CD changer
• CHANGER: To use the CD changer
1. To change the source to FM, AM or TAPE, press FM/AM or TAPE 2 .3
2.Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
3.Select “LINE IN” with 
¢ or 
4.
4.Select the desired mode with the control dial.
The external component selecting mode changes as follows:
LINE IN 
CHANGER
Note:
For connecting the Line Input Adaptor
ENGLISH
29