ENGLISH
Selecting
You can change the clock built in this unit either to
1.Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2.Select “24H/12H” with ¢or 4.
3.Select “24H” or “12H” with the control dial.
The clock alternates between
24H 12H
Selecting the level display
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
•AUDIO 1: Shows the audio level indicator and the equalization pattern indicator.
•AUDIO 2: Alternates “AUDIO 1” setting and illumination display.
• OFF: | Erases the audio level indicator and the equalization pattern indicator. |
1.Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2.Select “LEVEL” with ¢or 4.
3.Select the desired mode with the control dial. The level display setting changes as follows:
AUDIO 1 AUDIO 2 OFF
Selecting the display mode while using the CD changer (ONLY FOR
You can change the initial indication on the display either to disc number or to elapsed playing time, while using the CD changer.
1.Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2.Select “CH DISP” with ¢or 4.
3.Select “DISC” or “TIME” with the control dial.
DISC TIME
28