SPECIFICATIONS

ENGLISH

AUDIO AMPLIFIER SECTION

Maximum Power Output: Front: 40 W per channel Rear: 40 W per channel

Continuous Power Output (RMS):

Front: 16 W per channel into 4 Ω, 40 Hz to 20,000 Hz at no more than 0.8% total harmonic distortion.

Rear: 16 W per channel into 4 Ω, 40 Hz to 20,000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble:±10 dB at 10 kHz Frequency Response: 40 Hz to 20,000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 2.0 V/20 kΩ load (250n~Wb/m)

TUNER SECTION

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 105sec (C-60) Frenquency Response:

30 to 16,000 Hz (Normal tape) Signal-to-Noise Ratio: 56 dB Stereo Separation: 40dB

GENERAL

Power Requirement

Operating Voltage: DC 14.4 V (11 V to 16 V allowance)

Allowable Operational Temperature: 0˚C to +40˚C

Grounding System: Negative ground Dimensions (W × H × D)

Installation Size:

182 mm × 52 mm × 150 mm Panel Size: 188 mm × 58 mm × 14 mm

Mass: 1.4 kg (excluding accessories)

Frequency Range

FM: 87.5 MHz to 108.0 MHz

AM: (MW) 522 kHz to 1,620 kHz (LW) 144 kHz to 279 kHz

[FMTuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15,000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MWTuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LWTuner] Sensitivity: 50 µV

Design and specifications subject to change without notice.

42