Listening to the satellite radio

Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.

•JVC SIRIUS radio DLP—Down Link Processor, for listening to the SIRIUS Satellite radio.

•XMDirectTM Universal Tuner Box—With a JVC Smart Digital Adapter (XMDJVC100: not supplied), for listening to the XM Satellite radio.

ENGLISH

For SIRIUS Radio

Activate your subscription after connection:

1 Turn on the power.2Select “SAT” for the source.

JVC DLP starts updating all the SIRIUS channels. (See “GCI update”column below.)

•Once completed, JVC DLP tunes in to the preset channel, CH184.

3Check your SIRIUS ID, see page 45.

4Contact SIRIUS on the internet at <http://activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS toll-free at 1-888-539- SIRIUS (7474).

“Subscription Updated Press Any Key to Continue” appears on the monitor once subscription has been completed.

For XM Radio

Activate your subscription after connection:

1 Turn on the power.

2Select “SAT” for the source.

XMDirectTM Universal Tuner Box starts updating all the XM channels. “Channel 1” is tuned in automatically. (See “GCI update”column below.)

3Check your XM Satellite radio ID labelled on the casing of the XMDirectTM Universal Tuner Box, or tune in to “Channel 0” (see page 32).

4Contact XM Satellite radio on the internet at <http://xmradio. com/activation/> to activate your subscription, or you can call 1-800- XM-RADIO (1-800-967-2346).

Once completed, the unit tunes in to one of the available channels (Channel 4 or higher).

GCI (Global Control Information) update:

•If channels are updated after subscription, updating starts automatically, and no sound can be heard.

For SIRIUS: “Channels Updating XX% completed” appears.

For XM: “UPDATING” appears.

•Update takes a few minutes to complete.

•Do not press any button or perform any operation until updating is completed.

31

EXTERNAL DEVICES