JVC KW-AVX706 On:, Off:, Off, SSM, OSD, Mono, , On, Level, Normal, • Phase, Reverse, Through, Off, On, , Local, Subwoofer, Crossover, Low Power:, High Power, DX / Local

	Menu items	Selectable settings, [reference page]
	Subwoofer	Adjust the settings below in the submenu:
		• Phase: Subwoofer phase. Select either “Normal” or
		“Reverse,” which reproduces a better sound.
		• Level*13: Subwoofer output level. Level: –6to +8; Initial 0
	High Pass Filter	Through: Select when the subwoofer is not connected.
		On:	Select when the subwoofer is connected.
Sound	Crossover	Adjust the crossover frequency between the front/rear
		speakers and the subwoofer.
		80Hz, 120Hz, 150Hz
	Amplifier Gain	You can change the maximum volume level of this receiver.
		Off:		Deactivates the built-in amplifier.
		Low Power:		VOL 00 to 30 (Select this if the maximum
				power of the speakers is less than 50 W)
		High Power: VOL 00 to 50
	Rear Speaker*14	You can activate/deactivate the rear speakers.
		Off, On
	Mono	Only for FM. (Off, On), ☞[10]
	DX / Local	Only for FM. (DX, Local), ☞[11]
	SSM	Only for FM. ☞[11]
15	Title Entry	Only for conventional CDs, FM/AM stations, TV stations, AV-
Mode*
		IN, and EXT-IN. ☞[39]
	Off/Intro/Repeat/Random	Only for disc playback, SD playback, and iPod/D. player.
		☞[16, 30, 36]
	OSD	Only for TV. (Off, Channel, Channel+Station), ☞[35]
	Auto MEMORY	Only for TV. ☞[34]
List		The accessible lists differ depending on the sources.
Dual Zone		Off , On/Surround Off, On/Surround On, ☞[24]

*13 This subwoofer level setting take effects only when surround is deactivated (☞also page 44) *14 Functions only when Dual Zone is activated.

*15 Items listed under <Mode> vary among the playback sources.

ENGLISH

47SETTINGS