ENGLISH

More about this unit

General

Turning on the power

•By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback starts.

Watching picture

•If you change the aspect ratio to “Just,” both sides of the picture are extended horizontally to fit the picture to the monitor size. It may cause the center portion of the picture to look distorted.

FM/AMStoring stations in memory

•When SSM is over, received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).

DiscGeneral

•In this manual, words “track” and “file” are interchangeably used.

•This unit can also play back 8 cm discs.

•This unit can only play back audio CD (CD-DA) files if different type of files are recorded in the same disc.

•This unit can display only one-byte characters. No other characters can be correctly displayed.

Inserting a disc

•When a disc is inserted upside down, “Disc Error Please Eject” appears on the monitor. Eject the disc.

Ejecting a disc

•If the ejected disc is not removed within

15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc will not play this time.)

Speaker/signal indicators

Speaker indicators

Signal indicators

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•The speaker indicators—squares around “L,” “R,” “LS,” and “RS” lights in light blue, when the corresponding speakers are set to “Large” or “Small” (☞ page 44).

•The center speaker indicator—square around “C” lights in light blue, when the center speaker is set to “Large” or “Small” and when surround is activated.

•Sounds come out of the speakers whose speaker indicators are lit on the monitor.

•The SW indicator lights up when “Sub Woofer” is set to “On” (☞ page 44).

•The signal indicators indicate the incoming signals—L (front left) / R (front right) / C (center) / LFE (low frequency effect) / LS (left surround) / RS (right surround) / S (monaural surround).

•If the speaker is activated, but the signals corresponding to the speaker are not coming in, the signal indicators changes their color from white to black to indicate no signals coming in (therefore no sound comes through the corresponding speakers).

Changing the source

•If you change the source with Dual Zone deactivated, playback also stops without ejecting the disc.

Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously.

50