ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

 

SymptomsRemedies/Causes

 

• No sound comes out of the center speaker.

Center speaker is used only for surround playback. No sound

 

 

comes out for stereo playback.

 

• No sound comes out of the subwoofer while

This happens while playing some discs with “Auto” selected

 

playing in stereo.

for “Surround On” (☞pages 21 and 46). Cancel surround.

 

• Remote controller does not work.

Deactivate Dual Zone (☞page 24).

 

 

(While Dual Zone is activated, the remote controller only

 

 

functions for operating the DVD/CD player.)

General

• The monitor is not clear and legible for

Sunshine from the windshield may cause this symptom.

watching the playback picture.

page 41).

 

Adjust “Bright” and “Contrast” of “Screen Control.” (☞

 

• “Position Error Push Open Key” appears on the

The monitor panel angle has been forcibly adjusted, or

 

monitor.

interrupted while opening or closing. Press OPEN/CLOSE.

 

• “Mecha Error Push Reset” appears on the

Reset the unit (☞page 2).

 

monitor, and the panel does not move.

 

 

• “SD Loading Error” appears on the monitor.

SD is not inserted fully. Fully insert it into the slot to close

 

 

the monitor panel.

 

• The unit does not work at all.

Reset the unit (☞page 2).

FM/AM

• SSM automatic presetting does not work.

Store stations manually.

 

 

• Static noise while listening to the radio.

Connect the antenna firmly.

 

• Disc can be neither recognized nor played .

Eject the disc forcibly (☞page 2).

 

• Disc cannot be ejected.

Unlock the disc (☞page 17).

 

• Recordable/Rewritable discs cannot be played

• Insert a finalized disc.

 

back.

• Finalize the discs with the component which you used for

 

• Tracks on the Recordable/Rewritable discs

recording.

playback

cannot be skipped.

 

• “Disc Error Please Eject” appears on the

Insert the disc correctly again.

 

 

monitor.

 

Disc

• “Eject Error” or “Loading Error” appears on the

Changing the source by pressing SOURCE will solve this

monitor.

error.

 

• Sound and pictures are sometimes interrupted

• Stop playback while driving on rough roads.

 

or distorted.

• Change the disc.

 

• No playback picture appears on the monitor.

Parking brake wire is not connected properly. (☞

 

 

Installation/Connection Manual.)

 

• “Region Error Please Eject” appears on the

Region code is not correct (☞page 5).

 

monitor when you insert a DVD Video.

 

54