ENGLISH | Changing the source | |
• If you change the source, playback also stops | ||
| ||
| (without ejecting the disc). | |
| Next time you select “CD” or | |
| the playback source, disc play starts from | |
| where it has been stopped previously. |
Ejecting a disc
•If the ejected disc is not removed within
15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc will not play this time.)
Tape operations 
Playing a tape
•While locating a specified tune:
–If the tape is rewound to its beginning, playback starts from the beginning of that side.
–If the tape is
•In the following cases, Multi Music Scan (MMS), Blank Skip, and Repeat Play may not operate correctly:
–Tapes with tunes having long pianissimo passages (very quiet parts) or
–Tapes with short
–Tapes with high level noise or humming between tunes.
–The Dolby NR setting does not match. For example, if the tape is recorded with the Dolby C NR.
•Do not use the following tape:
–Dirty or dusty tapes.
–Cassette with peeling labels.
–Loose tape which may become entangled with the mechanism.
Changing the source
•If you change the source, playback also stops (without ejecting the cassette).
Ignition key-off release
•When you turn off the ignition key with a cassette in the compartment, the unit automatically releases the tape from its head.
General settings—PSM 
•If you change the “TAG DISP” setting from “TAG OFF” to “TAG ON” while playing MP3/WMA file, the tag display will be activated when the next file starts playing.
•If you change the “AMP GAIN” setting from “HIGH PWR” to “LOW PWR” while the volume level is set higher than “VOLUME 30,” the unit automatically changes the volume level to “VOLUME 30.”
Other main functions 
•If you try to assign a title to the 31st station frequency, “NAME FULL” flashes. Delete unwanted titles before assignment.
26
