Displaying the current status
The information of the current input is displayed.
Current input |
|
| DVI | |
|
| |||
Input signal format |
|
| 1400 x 1050A 60Hz | |
|
| |||
NOTE
•When no signal is input, “NO SYNC” appears. When a signal this monitor does not support is input, “Out of range” appears.
•When “STATUS DISPLAY” on the
–When you turn on the monitor
–When you change inputs
–When you change signal types.
Activating the Dual Display | |
You can view two Inputs at the same | |
Display. |
|
PIP (Picture In Picture) mode | PBP (Picture By Picture) mode |
Main window | Main window |
Sub window | Sub window |
•Each time you press the buttons, the Dual Display turns on or off.
•When the Dual Display is activated, the current input is displayed on the main window. Select the input for the sub window* on “DUAL DISPLAY” of “FUNCTION SETTING” (see page 14).
•The audio signals for the main window are emitted from the speaker.
•To turn off the Dual Display, press the same button again.
*You cannot select the same input as that of the main window and DVI input for the sub window.
NOTE
•Use the main menu to adjust position and/or size of the sub window (see “DUAL DISPLAY” on page 14).
Controlling only the monitor with specified ID
When using several monitors at once, you can control only a desired monitor by specifying its ID.
• To assign the ID, see “ID” on page 14.
To select the ID of the monitor to control
1Press ID ON.
ID of each monitor is displayed.
ID : 01
2Press number buttons to enter the desired ID.
3Press OK.
Now you can control only the monitor with the ID you have specified.
To control a monitor with another ID, cancel the ID control, then perform the procedure above.
To cancel the ID control, press ID OFF.
Selecting the picture mode
Each time you press the button, the picture mode changes. DYNAMIC: Suitable for displaying documents for presentation. NORMAL: Displays the original picture.
USER: You can adjust picture quality as you like (see “PICTURE SETTING” on page 13).
NOTE
•The picture mode is stored for each input.
•You can adjust the picture quality, such as brightness, for each picture mode. The setting you have made is stored (see “PICTURE SETTING” on page 13).
•When the Multi Display (see page 14) or the Dual Display (see the left) is in use, the picture mode cannot be changed.
11
