JVC LCT2505-001A-H manual Specifications, General, Input/output terminals

Specifications

General

Model name	GM-F470S	GM-F420S
Type	LCD Monitor
Screen size	Type 47 wide format	Type 42 wide format
Aspect ratio	16:9 (Wide format)
LCD panel	47 inch wide, active matrix TFT	42 inch wide, active matrix TFT
Effective screen size	1 039 mm x 584 mm (40 7/8” x	930 mm x 523 mm (36 9/16” x
(W x H, Diagonally)	22 15/16”), 1 192 mm (46 7/8”)	20 9/16”), 1 067 mm (42”)
Number of pixels displayed	1 920 (H) x 1 080 (V)
Number of colors displayed	1.07 billion (1 024 colors for each of RGB)
Viewing angle (TYP.)	178° (Horizontally), 178° (Vertically)
Brightness (TYP.)	700 cd/m2
Contrast ratio (TYP.)	1 000:1
Response time	9 msec
Weight	30 kg (66 lbs)	25 kg (55 lbs)
	31.2 kg (68.7 lbs) (including the	26.2 kg (57.7 lbs) (including the
	stands)	stands)
External dimensions	1 076 mm x 621 mm (42 3/8” x	964 mm x 557 mm (38” x 22”),
(W x H x D)	24 1/2”), 152 mm (6”)	152 mm (6”)
	When the stand is attached:	When the stand is attached:
	1 091 mm x 626 mm (43” x	979 mm x 562 mm (38 5/8” x
	24 3/4”), 326 mm (12 7/8”)	22 1/8”), 326 mm (12 7/8”)
Power requirements	AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
Rated input current	4.9 A (AC 120 V)	4.3 A (AC 120 V)
	3.6 A (AC 220 – 240 V)	3.3 A (AC 220 – 240 V)
Compatible signals	See page 8.
Audio power output	Internal: 1.7 W + 1.7 W (impedance 8 Ω)
	External: 6 Ω – 8 Ω, 2.3 W + 2.3 W (at impedance 6 Ω)
Speaker	Ellipse (70 mm (2 7/8”) x 40 mm (1 5/8”)) x 2, impedance 8 Ω
Operating conditions	Temperature: 0°C – 40°C (32°F – 104°F)
	Relative humidity: 20% – 80% (non-condensation)
	(Slightly variable depending on ambient conditions for installation.)
Notice on transportation

Input/output terminals

VIDEO IN	Video input	BNC terminal x 1	1 V (p–p), 75 Ω
VIDEO OUT	Video output	BNC terminal x 1	1 V (p–p), 75 Ω
RGB IN	RGB input	D-sub 3-row 15-pin x 1 (RGB is compatible with DDC2B.)
	Video signal		G: 1 V (p–p), 75 Ω (including sync)
			B, R: 0.7 V (p–p), 75 Ω
	Horizontal sync (HD)		HD: 2.0 V (p–p) to 5 V (p–p),
			(positive/negative polarity)
	Vertical sync (VD)		VD: 2.0 V (p–p) to 5 V (p–p),
			(positive/negative polarity)
RGB OUT	RGB input	D-sub 3-row 15-pin x 1
	Video signal		G: 1 V (p–p), 75 Ω (including sync)
			B, R: 0.7 V (p–p), 75 Ω
	Horizontal sync (HD)		HD: 5 V (p–p) (positive/negative
			polarity)
	Vertical sync (VD)		VD: 5 V (p–p) (positive/negative
			polarity)
DVI-D	DVI input (compatible	DVI-D terminal x 1 (Compatible with DDC2B)
(HDCP)	with HDCP)
AUDIO 1 IN	Audio input	Pin jack terminal x 2 (L/R)	500 mV (rms), high impedance
AUDIO 2 IN	Audio input	Stereo mini jack terminal x 1	500 mV (rms), high impedance
REMOTE	RS-232C input	D-sub 9-pin terminal x 1 (For RS-232C control)
	RS-485 input	RJ-45 pin terminal x 1 (For RS485, MAKE, and TRIGGER control)
	RS-485 output	RJ-45 pin terminal x 1 (For RS485 and IR OUT control)
	LAN	RJ-45 pin terminal x 1 (For LAN control)
AUDIO OUT	AUDIO 1 OUT	Pin jack terminal x 2 (L/R)	Output impedance 600 Ω
	AUDIO 2 OUT	Stereo mini jack terminal x 1	Output impedance 600 Ω
	EXT. SPEAKER OUT	Speaker output terminal (L/R)	Impedance 6 Ω to 8 Ω
AC OUTLET	AC power output	IEC320 type x 1	Rated output current: 2 A

This monitor is precision equipment and needs dedicated packing material for transportation.

Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.

Checking the accessories					Motion
The following accessories are included with the monitor. Check for them. If any item is missing, please contact the dealer where you have purchased the monitor.					sensor unit
• Remote control (RM-C1730)		• Stand unit
• Batteries (AA/R6) x 2			Stand x 2, Screws (M4 x 12 mm) x 6
• Power cord/Power cord holder		•	Snapping ties x 5	Snapping ties	Covering sticker
•	Screws for power cord holder	•	Covering sticker x 1
•	Motion sensor unit		Screws for power
			cord holder
	Motion sensor x 1, Screw (M4 x 12 mm) x 1, cord cramp x 5			Stand unit

29