Citizen CBM1000 manual Print Paper Specifications, Recommended Paper

2.3Print Paper Specifications

2.3.1Recommended Paper

(1) Thermal Paper roll

• Type:	Heat sensitive paper
• Paper width:	80	+ 0/– 1 mm; 58 + 0/– 1 mm
• Paper thickness:	65	± 5 µm
• Roll diameter:	φ 83 mm or less
• Print side:	Outer side of the roll (Top surface)

•Recommended paper: P220VBB-1/HP220A (From Mitsubishi Paper) TF50KS-E2C (From Nippon Paper) KF50-HDA (From Oji Paper)

or equivalent types of paper

•Core size:φ12 mm (Inside diameter); φ18 mm (Outside diameter)

(2) Thermal Lavel paper roll

• Type:	Heat sensitive paper (Label paper)
• Paper width:	80 + 0/– 1 mm; 58 + 0/– 1 mm

•Label Paper thickness: 65 – 85 µm

•Postebord thickness: 60 µm or less

• Roll diameter:	φ 83 mm or less
• Print side:	Outside of the roll (Top surface)

•Recommended paper: KPT86S/G63BC P22 (OHJI TUCK) or equivalent type of label paper

•Core size:φ25 – φ28 mm (Outside diameter)

CAUTION:

•Use of paper other than the specified papers may cause a difference in print density from the CBM specifications. In that case, you can select an appropriate print density with a DIP switch. (See “5. SETTING DIP SWITCHES”)

•Do not stick the end of paper to the core with adhesive paste.

•Avoid allowing the surface of paper to contact with chemicals or oils; otherwise, it may get colored or the printed data on it may become erased.

•Avoid scraping on the surface of paper with your nail or a metal object; otherwise, the surface of heat-sensitive paper may get colored.

•Heat-sensitive paper starts getting colored at approx. 70°C; so, be careful not to expose the paper to the effects from heat, humidity, or sunlight.

— 5 —