Citizen CBM1000 manual GS c, GS I n1L n1H n2L n2H

GS c

[Function]	Print the counter
[Code]	<1D>H<63>H
[Outline]	This command prints the serial number counter data. fter setting
	the current counter value in the print buffer as the print data
	(Character string), it increments or decrements the counter
	according to the set count mode.
[Caution]	• When setting the value in the print buffer, its format depends
	on the GS c command, the counter will be initialized to the set
	default.
[See Also]	GS C0 , GS C1 , GS C2 , GS C ;
[Sample Program]
[Print Result]	See the sample programs and print results for the GS C1
	command.

GS I n1L n1H n2L n2H

[Function]	Setting the label length
[Code]	<1d>H<6C>H<n1L><n1H><n2L><n2H>
[Range]	0	n1L	255
	0	n1H	1 (25 n1L+ n1H * 256 360)
	4	n2L	30

	n2H = 0
[Outline]	Define the specifications (lengths) of the label used.
	n1: Defines the length of the label (mm).
	n2: Defines the label gap length (mm).
[Caution]	• If the specified length is outside the label specifications, the
	default length is assumed.
[Default]	• The following default value will be assumed if DS2-9 is set to
	ON.
	• Label length: 25 mm (n1L=25, n1H=0)	<
			n1
	Label gap length: 4 mm (n2L=4, n2H=0)	<
		<
			n2
		<

— 147 —