Citizen CBM1000 manual Hexadecimal Dump, Starting hexadecimal dump

4.10 Hexadecimal Dump

Hexadecimal dump function allows data sent from the host computer to be printed in hexadecimal numbers as well as in characters corresponding to the numbers.

Starting hexadecimal dump

1 Open the top cover.

2 While pressing the FEED switch, turn on the power of the printer “➀”.

3	When you close the cover “➁”, a	2
	message “Hexadecimal Dump” is
	printed on paper, and then the data
	received afterward is printed in
	hexadecimal numbers and the
	corresponding characters.
	• If a character is not available
	corresponding to the data received,
	“ . ” is printed instead.
	• During hexadecimal dump, no
	other functions than DLE EOT and	1
	DLE ENQ work.
	• If the data received is not enough
	for a full line, pressing the FEED
	switch causes the line to be	1
	printed.

<Example of hexadecimal dump>

=== Hexadecimal Dump ===

Quitting hexadecimal dump

4 After hexadecimal printing, this function is terminated when you turn off the power or when a reset signal is received from the interface.

— 22 —