Citizen CBM1000 manual 1DH56Hm

GS	V	m ......... (1)
GS	V	m n ..... (2)

[Function]	Cutting the paper
[Code]	(1)	<1D>H<56>H<m>
	(2)	<1D>H<56>H<m><n>
[Range]	(1)	m = 1, m = 49
	(2)	m = 66
		0 n	255
[Outline]	Performs the specified paper cutting.
		m	Function
	1,49		Partial cut (Leaving a bridge area uncut)
	66		Paper feed by “cut position + {n × basic calculation
			pitch}”and partial cut (Leaving a bridge area uncut)
[Caution]	• Fully cut for the label sheet specs.
	• In STANDARD MODE, this command only works when it is
	entered at the beginning of a line.
	For (1):

• A partial cut (Leaving a bridge area uncut) is executed. For (2):

• If n = 0, the paper is fed to the cut position, and then cut. If n ≠ 0, the paper is fed by “n × basic calculation pitch” inches past the cut position, and then cut.

• The basic calculation pitch is set by GS P.

The paper feed amount is calculated with the vertical basic calculation pitch (y).

A fraction resulting from the calculation is corrected with the minimum pitch of the mechanism, and the remainder is omitted.

CAUTION:

When using label sheet:

•Be sure to cut the base sheet at every label gap. Otherwise, the cutter performance will be immensely degraded.

•Never open the printer cover while printing as proper print operation may not be guaranteed. Opening the printer cover may alter label length setting or other parameters.

•Never use label rolls with different label sizes or label gaps as proper print operation will not be guaranteed.

— 109 —