Citizen CBM1000 manual ESC p m n1 n2

ESC p m n1 n2

[Function]	Generating the specified pulses
[Code]	<1B>H<70>H<m><n1><n2>
[Range]	m = 0, 1, 48, 49
	0	n1	255
	0	n2	255
[Outline]	The signals specified by “n1” and “n2” are output to the
	connector pin specified by “m”.

• “m” has the followings.

m

0, 48

1, 49

Connector Pin

Drawer Kick-Out pin No.2

Drawer Kick-Out pin No.5

	• The ON time is n1 × 2 ms, and OFF time n2 × 2 ms.
[Caution]	• When “m” is beyond a definition range, no signal is output,
	discarding “n1” and “n2”.
	• The drawer drive duty must be within the following range:
		ON time
				0.2
		ON time + OFF time
	(The OFF time should be 4 times or more longer than the ON
	time.)
[Default]	The initial value for “m”, “n1” and “n2” is not defined.
[Sample Program]	LPRINT CHR$(&H1B) + “p”;
	LPRINT CHR$(0);		←⎯⎯ Selects pin No. 2.
	LPRINT CHR$(5);		←⎯⎯ Sets ON time to 10ms
	LPRINT CHR$(50);		←⎯⎯ Sets OFF time to 100ms
	END

— 91 —