Citizen CBM1000 manual GS C n1 n2 n3 n4 n5

GS C ; n1 ; n2 ; n3 ; n4 ; n5 ;

[Function]	Setting the numbering counter mode (B)
[Code]	<1D>H<43>H<3B>H<n1><3B>H<n2><3B>H<n2>
		<3B>H<n3><3B>H<n4><3B>H<n5><3B>H
	<n1>,<n2>,<n3>,<n4>,<n5> are character codes.
[Range]	0	n1 , n2 , n5	65535
	0	n3 , n4 255
[Outline]	This command		sets the numbering (serial number counter)
	mode and a counter value.
	n1		: Counter default
	n2		: Counter final value
	n3		: Counter step value
	n4		: Idential counter print count
	n5		: Counter start value
	n1	< n2	: Count-up system
	n1	> n2	: Count-down system
	n1	= n 2 or n3 = 0 or n4 = 0 : Counter stop
[Caution]	If the n5 counter start value is beyond the counter range specified
	with n1 and n2, it is assumed to be n1 = n5.
	If each value of n1 through n5 contains the character code other
	than “0” through “9”, the printer will invalidate the data up to
	that parameter and handle the subsequent data as normal data.
[Default]	n1 = 1
	n2	= 65535
	n3	= 1
	n4	= 1
	n5	= 1

[See Also]	GS C0 , GS C1 , GS C2 , GS c
[Sample Program]	LPRINT CHR$(&H1D) ;”C0”;
	LPRINT CHR$(3);CHR$(0);
	LPRINT CHR$(&H1D);”C;”;
	LPRINT ”50;0;5;2;50;
	GOUSAB *CNT
	LPRINT CHR$(&H1D);”C;”;
	LPRINT ”50;0;5;2;5”;
	GOUSAB *CNT
[Print Result]	END

*CNT

FORI = 1 TO 5

LPRINT CHR$(&H1D);”c”;

NEXT I

LPRINT CHR$(&HA);

RETURN

		When setting a count-down range = 0 to 50, step
	<	value = 5, repeat count = 2, and start value = 50 to
50 50 45 45 40 40		print a counte value.

50 50 45 40 35 < When setting a count-down range = 0 to 50, step value = 5, repeat count = 1, and start value = 5 to print a counter value.

— 146 —