Citizen CBM1000 manual ESC SP n, Default See Also

ESC SP n

[Function]	Setting the right spacing of the character
[Code]	<1B>H<20>H<n>
[Range]	0 n 255
[Outline]	Sets the right spacing of character to [n × basic calculation pitch]
	inches.
[Caution]	• If the horizontal magnification of character is 2 or more, the
	right spacing increases with the magnification.
	• The right spacing can be set separately for the STANDARD
	and PAGE MODES.
	• The basic calculation pitch is set by GS P. Once defined, the
	right spacing is not changed if the basic calculation pitch is
	changed by GS P.
	• Fractions resulting from calculation are corrected with the
	minimum pitch of the mechanism, and the remainder is
	omitted.
	• In STANDARD MODE, this command uses the horizontal basic
	calculation pitch (x).
	• In PAGE MODE, the basic calculation pitch used by this
	command depends on the start point:
	(1) If the start point specified by ESC T is top left or bottom
	right, the command uses the horizontal basic calculation
	pitch (x).
	(2) If the start point specified by ESC T is top right or bottom
	left, the command uses the vertical basic calculation pitch
	(y).
	• The maximum right spacing is capable of approximately 31.906
	mm (255/203 inches). A setting greater than this maximum is
	trimmed to the maximum.
[Default]	n = 0
[See Also]	GS P

— 56 —