How to Use the MAIN MENU
The MAIN MENU contains the functions for daily use.
MAIN MENU
Select
Adjust
ENGLISH
Operation guide Shows the buttons for each operation.
7To exit the menu:
NOTE:
When analog RGB signals are input from the computer
Select “AUTO
ADJ.”
Perform “AUTO
ADJ.”
Select “all reset”
Next
Perform “all reset”
•The menu automatically disappears in about 30 seconds after the last menu operation.
•Some items may not appear on the menu. Those items are not available for the current input or the current input signal.
Cancel
7MAIN MENU items
BACK LIGHT
Adjusts the brightness of the display.
Setting value: 00 - 25
SHARPNESS
Adjusts the clearness of the picture.
Setting value: 00 - 10
CTI.
Adjusts the clearness of the outlines of the color signals (R/G/B).
Setting value: OFF, NORMAL, HARD
LTI.
Adjusts the clearness of the outlines of the luminance signal.
Setting value: OFF, NORMAL, HARD
ASPECT
Selects the aspect ratio.
Setting value: 4:3, 16:9
NOTE:
• Memorized for each input.
ADJ. BAR POSI.
Selects the position of the adjustment bars. Setting value: UPPER, LOWER
AUTO ADJ.
Adjusts the position of the picture automatically when analog RGB signals are input from the computer. By using this function, the picture is displayed as large as possible in the effective screen area.
•Adjust the items in “SIZE/POSI. ADJ. (RGB)” (☞ page 15) manually when you cannot get a good picture quality with “AUTO ADJ.”
COLOR SYSTEM
Selects the color system.
Setting value: AUTO, NTSC, PAL
NOTE:
• If the picture is unstable with “AUTO,” select “NTSC” or “PAL.”
all reset
Restores all the settings and adjustments of the monitor to the factory settings.
•Adjustments made by using the buttons on the front panel will also be reset.
NOTE:
•“HOUR METER X100h” (☞ page 16) and the settings of “SIZE/POSI. ADJ. (RGB)” (☞ page 15) will not be reset.
•After performing “all reset,” the screen goes back to the
MAIN MENU.
13
