JVC LM-170 manual Available computer signals, Preset signals, Specification of the DVI-D terminal

Specifications (cont.)

Specification of the DVI-D terminal

		Pin No.	Input signal		Pin No.	Input signal		Pin No.	Input signal
9 1	8 16	1	T.M.D.S Data 2–		9	T.M.D.S Data 1–		17	T.M.D.S Data 0–
		2	T.M.D.S Data 2+	10		T.M.D.S Data 1+	18		T.M.D.S Data 0+
		3	T.M.D.S Data 2/4 shield	11		T.M.D.S Data 1/3 shield	19		T.M.D.S Data 0/5 shield
17	24
		4	NC	12		NC	20		NC
		5	NC	13		NC	21		NC
		6	DDC Clock	14		+5 V Power	22		T.M.D.S Clock shield
		7	DDC Data	15		GND	23		T.M.D.S Clock+
		8	NC	16		Hot Plug Detect	24		T.M.D.S Clock–

Specification of the RGB terminal (D-sub 15-pin)

Pin No.	Input signal		Pin No.	Input signal
1	Red	9		+5 V
2	Green	10		GND
3	Blue	11		GND
4	—	12		DDC data
5	GND	13		Horizontal sync/
				composite sync
6	GND	14		Vertical sync
7	GND	15		DDC clock
8	GND		External	GND

7Available computer signals

The following computer signals can be displayed on the monitor.

Preset signals

Signal name	Screen	Vertical frequency
	resolution	(reflesh rate)
VGA	640 x 350*	70 Hz*
	640 x 480	60 Hz
SVGA	800 x 600*	56 Hz*
	800 x 600	60 Hz
XGA	1024 x 768	60 Hz
	1024 x 768*	70 Hz*
SXGA	1280 x 1024	60 Hz
(LM-170 only)
US TEXT	720 x 400*	70 Hz*
Macintosh	640 x 480*	67 Hz*

For analog RGB signals:

In the following cases, perform “AUTO ADJ.” (☞ page 13)

•When inputting other signals than those listed in this table

•If the picture of the listed signals is displayed in wrong position or size

If “AUTO ADJ.” does not solve the problem, adjust the items in “SIZE/POSI. ADJ. (RGB).” (☞ page 15)

* Analog RGB signals only

22