JVC LM-170, LM-150 manual Controls and Features, Front panel

Controls and Features

7Front panel

1 2

3 4 5 6 7

The illustration of the monitor is of LM-170.

1Speaker (Monaural) (LM-170 only)

Outputs the audio signal of the selected input.

NOTE:

•For audio signals input to the DVI-D or RGB terminal, left and right audio channel are mixed and output as monaural audio.

2CHROMA/PHASE button*1

Activates the Chroma (picture color density) adjustment mode or the Phase (picture hue) adjustment mode.

•Press the button to select the mode, then adjust the value (–25 - 00 - +25) by pushing the menu control button (4) left or right.

NOTE:

•Chroma is adjustable when the NTSC or PAL signal is input.

•Phase is adjustable when the NTSC signal is input.

3CONTRAST/BRIGHT button*1

Activates the picture contrast adjustment mode or picture brightness adjustment mode.

•Press the button to select the mode, then adjust the value (–25 - 00 - +25) by pushing the menu control button (4) left or right.

4Menu control button

Operates the menu by pushing or pressing the button to the indicated direction.

☞ pages 13 and 14

Pushing the button up or down:

Selects a menu item.

Pushing the button left or right:

Adjusts the selected menu item.

Pressing the center of the button:

•Goes to the next step.

•Performs the selected function.

5Volume control button (LM-170 only)*2

While the menu is not displayed, adjust the volume level (00 to 50) by pushing the button left or right.

6MENU button

Displays the MAIN MENU.

☞ page 13

To display the SET-UP MENU:

Press the CHROMA/PHASE button (2) while pressing the MENU button. (☞ page 14)

7SCAN SIZE button/lamp

Selects the screen size.

OVER = 100% = USER = (back to the beginning)

NOTE:

•Memorized for each input.

•For LM-170: when “100%” is selected, black bars appear on the top and the bottom of the screen because the aspect ratio of the LCD panel is 5:4.

•When “USER” is selected, horizontal/vertical size and position can be manually adjusted. (☞ “SIZE/POSI. ADJ. (USER)” on page 15)

•When “100%” or “USER” is selected, the lamp lights up.

•This function is not available for the computer signals.

*1 During picture adjustment:

•The adjustment bar will disappear in about 10 seconds after the last operation.

•Pressing MENU will also make the adjustment bar disappeared.

•“NO EFFECT” is displayed when the operation you have tried is not available for the current input or setting.

•The position of the adjustment bar can be changed. (☞ “ADJ. BAR POSI.” on page 13)

*2 During volume adjustment (LM-170 only):

•The adjustment bar will disappear in about 5 seconds after the last operation.

•Pressing MENU will also make the adjustment bar disappeared.

•The position of the adjustment bar can be changed. (☞ “ADJ. BAR POSI.” on page 13)

8