JVC LPT0679-001A Select the deck, Access the PlusCode display, Enter the PlusCode number

36 TIMER RECORDING

VIDEO Plus+® Timer Programming

With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize.

You can use the remote control with LCD panel to enter the PlusCode number.

Before performing the VIDEO Plus+ Timer Programming:

●Make sure that the recorder’s built-in clock is set properly.

●Turn on the TV and select the AV mode.

LCD panel

1
2
1	2	3
4	5	6	3
7	8	9	4
			4
	0
1			3
2

A Turn on the recorder.

Press 1.

B Load a cassette.

Insert a VHS (or S-VHS) cassette with the record safety tab intact.

OR

Insert a Mini DV cassette with the erase protection switch set to “REC”.

C Select the deck.

Press VHS or DV.

D Access the PlusCode display.

Press LCD PROG.

The LCD panel looks like this:

E Enter the PlusCode number.

Press the number keys to enter the PlusCode number of a programme you wish to record.

●If you make a mistake, press & and input the correct number. The PlusCode number you enter appears on the LCD panel:

F Transmit the PlusCode number.

Press to transmit the PlusCode number from the remote control to the recorder.

●If the number you entered is invalid, “ERROR” appears on the TV screen and “Err” appears on the front display panel. Input a valid PlusCode number.