DV Mode SET | JVC LPT0679-001A instruction

71

DV MODE SET

* The default setting is bold in the table below.

8 SOUND MODE	Select the appropriate mode before recording on a Mini DV tape.
12BIT	12BIT:	Enables Audio Dubbing later.
16BIT	16BIT:	Audio Dubbing is impossible but the recorded sound quality is
		higher than “12BIT”.

8 12BIT MODE	Select the appropriate mode when playing back an audio-dubbed Mini DV tape.
SOUND1	SOUND1:	Original recorded sound
SOUND2	SOUND2:	Audio-dubbed sound
FULL SOUND	FULL SOUND:Original recorded sound and Audio-dubbed sound
	NOTES:
	● When “12BIT MODE” is set to “FULL SOUND”, both the main and sub audio will be
	audible for bilingual tapes.
	● To select only the main audio or only the sub audio of bilingual tapes, set “12BIT MODE”
	to “SOUND1”.

8 AUDIO REC	Select the appropriate mode when recording the NICAM bilingual programmes.
NICAM	NICAM:	The NICAM audio programme will be recorded on the audio
MONO	MONO:	track.
	MONO:	The Standard (monaural) audio programme will be recorded on
		the audio track.

8 TIME CODE	When this function is set to “ON”, the time code always appears on the TV screen
ON	while the DV deck is being selected.
OFF	When this functions is set to “OFF”, the time code appears on the TV screen only
	by pressing – –:– –. ( pg. 7, 35)

Image 71

JVC LPT0679-001A specifications DV Mode SET

Contents

Video Cassette Recorder Do not expose the apparatus to dripping or splashing Do not place the recorder Above ALL Some Do’s And Don’ts On The Safe Use Of Equipment Front View Do not remove it Rear View Front Display Panel PDC* Indicator pg On the tape BeginningEnd ON-SCREEN Display for VHS deck VHS Remote Control Remote Control LCD How To Use Check Contents Connect the recorder to mains Recorder and the TV’s 21-pin Scart connectorSituate the recorder Connect the recorder to TV Video Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsAerial connector Before starting, make sure of the following Auto Set UpPerform Auto Set Up Turn on the recorder On the on-screen display Perform Preset DownloadPress rt to select CH - and press OK or e pg , Just Clock Just Clock Direct Rec NexTView Link TV Auto Power OnLink Functions VCR Auto Standby Make connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller Setting satellite receivers brand and channel Check the result of the test Select the satellite receiver’s channel for testing VHS deck Basic Playback Pause/Resume recording Choose a programmeSet the tape speed Start recording Activate frame-by-frame playback Slow MotionPause during playback Skip Search High-Speed Turbo SearchVariable Speed Search Index Search Stop Repeat Playback Next Function MemoryRepeat Playback Activate Repeat Playback Ntsc Playback Adjust the tracking manuallySoundtrack Selection Manual Tracking Accidental erasure prevention Instant Timer Recording ITREngage the ITR mode Recording Resume Function Press 0000 before starting recording or playback Reset the counterTape Remaining Time Set the counter display Locate the start point Engage the Record-Pause modeRetake Receiving Stereo and Bilingual Programmes Recording Playback Find the programme start point DV deckSelect the DV deck Press DV DV recording indicator turns off PLAYBACK/RECORDING on DV Deck During playback or still, press 5 for forward high-speed For forward high-speed searchDuring playback, turn the JOG dial quickly to the right Search, or 3 for reverse high-speed search Recording Features See Audio REC on Time Code Transmit the PlusCode number Access the PlusCode displaySelect the deck Enter the PlusCode number Return to the normal screen Set the PDC modeEngage the recorder’s timer mode Check the programme data Enter the programme start time Express Timer ProgrammingAccess the PlusCode screen Access the Programme screen Enter the channel position To Timer-Record Weekly Or Daily SerialsPDC Recording Enter the programme date For the VHS deck Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelPage Return to the timer mode Disengage the timer modeAccess the Programme screen/display Cancel or change a programme Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify Select the dubbing direction Tape DubbingFrom DV to VHS Dubbing An Entire Cassette Load cassettes Press DV, then press SP/LP p Dubbing direction indicator VHS lightsFrom VHS to DV Dubbing An Entire Cassette Pause dubbing From DV to VHSLocate the start point on the DV deck Prepare the VHS deck for dubbing Prepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightFrom VHS to DV Locate the start point on the VHS deck Start the camcorder Set the recorder’s input modeSelect the recording deck Set the edit mode. VHS deck only Player If the camcorder has no S-VIDEO output connectorSimultaneous Dubbing Recorder Video input Start the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recorders Player Recorder RecorderAnother recorder Press rt to move Access the Main Menu screen Select the input mode for the Video Video connector Select SettingVHS F-1 Input Setting Decoder connector Pre-recorded tape Audio-dubbed tape CD player, etc Audio DubbingVHS Audio Dubbing DV Audio Dubbing Press A.DUB Engage the Audio Dubbing modeEnd Audio Dubbing Source tape DV Insert Editing SP mode onlyInsert Editing VHS Insert Editing Start Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassette Press R.A.EDIT. The R.A.Edit screen appears Access the R.A.Edit screenSelect the programme Insert a VHS or S-VHS cassette and a Mini DV cassette End Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble Editing Change the recorder’s code Change the remote control codeSet the remote control code Display the code Operate the TV TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Set the TV brand code Operate the satellite receiver Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Digital printer About DV IN/OUT connectorTo DV in connector Outdoor unit Satellite cable Aerial ConnectorAerialPin Scart connector Mains outlet Speaker Television Make connectionsFM tuner CD player Stereo amplifier AUX in or Tape Monitor Select the mode setting Mode SetAccess the Mode Set screen Select the mode Control, or press 7 on the recorder Mode SETPowered back on Screen VHS Mode SET VHS Mode SET We recommend that you set Digital TBC/NR to on when Using this video recorder as the source player for editingRental cassettes Picture reproduction is also linked to this function DV Mode SET Perform Auto Channel Set Tuner also by Preset Download pgTuner Set Auto Channel Set View the Confirmation screen Manual Channel Set Delete a channel Delete a ChannelChange Station Channel Position Select the item Set Stations B Set Stations a Press OK twice. The Manual Channel Set screen appears Access the Manual Channel Set screenPerform tuning Select the channel to fine-tune Station Name TV Station And ID List TV Station Channel Number Guide Clock Set Access the Clock Set screen Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data Enter the Guide Program number Video Plus+ System SetupGuide Program Number Set Guide Program Number Connect the mains power cord No power is supplied to the recorder Tab removed Tab was removed Recording cannot be startedThere is no cassette loaded, or Adhesive tape, cover the hole where DV deck VHS deck Turn off the recorder or the connected Turn off the recorder once and connectNot connected between TV Recording Timer RecordingPlayback Hz to 20,000 Hz Hi-Fi audio Maximum recording time Scan systemLines VHS Lines S-VHS Frequency range Hz to 10,000 Preset Download Random Assemble Editing Auto Channel Set Auto Set UpClock Set Connecting To a Printer Express Timer Programming Memo