JVC LPT0679-001A specifications From VHS to DV, Locate the start point on the VHS deck

47

Normal Dubbing

(from VHS to DV)

1 3 2

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
2

NOTES:

●If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to copy. It is recommended to conduct a test with unimportant cassettes first.

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●The superimposed indication during the operation or dubbing is not recorded.

●To cancel the dubbing mode, press PR +/– so that the dubbing direction indicator (VHS) goes off.

●Before you start dubbing, set “SOUND MODE” to the appropriate mode. ( pg. 71)

You can dub selected scenes on a tape, starting and stopping wherever you wish.

A Load cassettes.

For the VHS deck

Insert a VHS (or S-VHS) cassette with the record safety tab removed.

For the DV deck

Insert a Mini DV cassette with the erase protection switch set to “REC”.

B Select the dubbing direction.

Press .

●The dubbing direction indicator ( VHS) lights.

C Set the tape speed.

Press DV, then press SP/LP (p).

●“DV } VHS” appears on the TV screen if “O.S.D.” is set to “ON”. ( pg. 67)

D Locate the start point on the VHS deck.

APress VHS.

BPress 4 to start playback.

CPress 9 to pause playback a little before the start point.

E Prepare the DV deck for dubbing.

APress DV.

BPress and hold 9 and press 7 so that the DV deck

enters the Record Pause mode.

●VHS playback indicator and DV recording indicator light.

F Start dubbing.

Press START.

G Pause dubbing.

Press START.

●The DV deck enters the Recording Pause mode, then the VHS deck enters the Dubbing Pause mode.

H End dubbing.

Press 8 to stop recording on the DV deck. Then press VHS and press 8 to stop playback on the VHS deck.