About DV IN/OUT connector, To DV in connector

SYSTEM CONNECTIONS

Connecting To A Printer

		Your recorder
1	3	2

DV IN/OUT

DV cable (VC-VDV204) (not provided)

To DV IN connector

Digital printer

You can make printouts of video images by connecting the GV-DT1/GV-DT3 Digital Printer (sold separately) to the DV IN/OUT connector.

A Make connections.

Connect the printer’s DV IN connector to the recorder’s DV IN/OUT connector.

B Select the deck.

Press DV.

●When you use the VHS deck ...

... Press . The dubbing direction indicator ( VHS) lights.

C Start playback.

Press 4.

●The image being displayed on the TV screen is output to the digital printer. Any on-screen displays are not output.

NOTES:

About DV IN/OUT connector

●To output digital signal when dubbing from the VHS deck to

other device through the DV IN/OUT connector, press , and then pressing 4 to start playback on the VHS deck.

●When connecting this recorder to a device equipped with a DV input connector, be sure to use the optional DV cable (VC-VDV204).

Page 63

Image 63

JVC LPT0679-001A specifications About DV IN/OUT connector, To DV in connector, Digital printer

Contents

Video Cassette Recorder Do not expose the apparatus to dripping or splashing Do not place the recorder Above ALL Some Do’s And Don’ts On The Safe Use Of Equipment Front View Do not remove it Rear View Front Display Panel PDC* Indicator pg On the tape BeginningEnd ON-SCREEN Display for VHS deck VHS Remote Control Remote Control LCD How To Use Check Contents Connect the recorder to mains Recorder and the TV’s 21-pin Scart connectorSituate the recorder Connect the recorder to TV 8To connect to a TV with S-VIDEO/AUDIO in connectors Aerial connectorVideo Connection Before starting, make sure of the following Auto Set UpPerform Auto Set Up Turn on the recorder Perform Preset Download Press rt to select CH - and press OK or eOn the on-screen display pg , Just Clock Just Clock Direct Rec NexTView Link TV Auto Power OnLink Functions VCR Auto Standby Make connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller Setting satellite receivers brand and channel Check the result of the test Select the satellite receiver’s channel for testing VHS deck Basic Playback Pause/Resume recording Choose a programmeSet the tape speed Start recording Slow Motion Pause during playbackActivate frame-by-frame playback Skip Search High-Speed Turbo SearchVariable Speed Search Index Search Stop Repeat Playback Next Function MemoryRepeat Playback Activate Repeat Playback Ntsc Playback Adjust the tracking manuallySoundtrack Selection Manual Tracking Accidental erasure prevention Instant Timer Recording ITREngage the ITR mode Recording Resume Function Press 0000 before starting recording or playback Reset the counterTape Remaining Time Set the counter display Locate the start point Engage the Record-Pause modeRetake Receiving Stereo and Bilingual Programmes Recording Playback Find the programme start point DV deckSelect the DV deck Press DV DV recording indicator turns off PLAYBACK/RECORDING on DV Deck During playback or still, press 5 for forward high-speed For forward high-speed searchDuring playback, turn the JOG dial quickly to the right Search, or 3 for reverse high-speed search Recording Features See Audio REC on Time Code Transmit the PlusCode number Access the PlusCode displaySelect the deck Enter the PlusCode number Return to the normal screen Set the PDC modeEngage the recorder’s timer mode Check the programme data Enter the programme start time Express Timer ProgrammingAccess the PlusCode screen Access the Programme screen Enter the channel position To Timer-Record Weekly Or Daily SerialsPDC Recording Enter the programme date For the VHS deck Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelPage Return to the timer mode Disengage the timer modeAccess the Programme screen/display Cancel or change a programme Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify Select the dubbing direction Tape DubbingFrom DV to VHS Dubbing An Entire Cassette Load cassettes Dubbing direction indicator VHS lights From VHS to DV Dubbing An Entire CassettePress DV, then press SP/LP p Pause dubbing From DV to VHSLocate the start point on the DV deck Prepare the VHS deck for dubbing Prepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightFrom VHS to DV Locate the start point on the VHS deck Start the camcorder Set the recorder’s input modeSelect the recording deck Set the edit mode. VHS deck only Player If the camcorder has no S-VIDEO output connectorSimultaneous Dubbing Recorder Video input Start the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recorders Recorder Another recorderPlayer Recorder Press rt to move Access the Main Menu screen Select the input mode for the Video Video connector Select SettingVHS F-1 Input Setting Decoder connector Pre-recorded tape Audio-dubbed tape CD player, etc Audio DubbingVHS Audio Dubbing DV Audio Dubbing Engage the Audio Dubbing mode End Audio DubbingPress A.DUB Source tape DV Insert Editing SP mode onlyInsert Editing VHS Insert Editing Start Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassette Press R.A.EDIT. The R.A.Edit screen appears Access the R.A.Edit screenSelect the programme Insert a VHS or S-VHS cassette and a Mini DV cassette End Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble Editing Change the recorder’s code Change the remote control codeSet the remote control code Display the code Operate the TV TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Set the TV brand code Satellite Receiver Multi-Brand Remote Control Set the satellite receiver brand codeOperate the satellite receiver About DV IN/OUT connector To DV in connectorDigital printer Aerial ConnectorAerial Pin Scart connector Mains outletOutdoor unit Satellite cable Speaker Television Make connectionsFM tuner CD player Stereo amplifier AUX in or Tape Monitor Select the mode setting Mode SetAccess the Mode Set screen Select the mode Control, or press 7 on the recorder Mode SETPowered back on Screen VHS Mode SET VHS Mode SET We recommend that you set Digital TBC/NR to on when Using this video recorder as the source player for editingRental cassettes Picture reproduction is also linked to this function DV Mode SET Perform Auto Channel Set Tuner also by Preset Download pgTuner Set Auto Channel Set View the Confirmation screen Manual Channel Set Delete a channel Delete a ChannelChange Station Channel Position Select the item Set Stations B Set Stations a Press OK twice. The Manual Channel Set screen appears Access the Manual Channel Set screenPerform tuning Select the channel to fine-tune Station Name TV Station And ID List TV Station Channel Number Guide Clock Set Access the Clock Set screen Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data Enter the Guide Program number Video Plus+ System SetupGuide Program Number Set Guide Program Number Connect the mains power cord No power is supplied to the recorder Tab removed Tab was removed Recording cannot be startedThere is no cassette loaded, or Adhesive tape, cover the hole where DV deck VHS deck Turn off the recorder once and connect Not connected between TVTurn off the recorder or the connected Timer Recording PlaybackRecording Scan system Lines VHS Lines S-VHS Frequency range Hz to 10,000Hz to 20,000 Hz Hi-Fi audio Maximum recording time Preset Download Random Assemble Editing Auto Channel Set Auto Set UpClock Set Connecting To a Printer Express Timer Programming Memo