Set the recorder’s input mode | JVC LPT0679-001A specs

48	EDITING (cont.)

Edit From A Camcorder

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
2

You can use a camcorder as the source player and your recorder as the recording deck.

You can perform digital dubbing if you connect a device such as a camcorder which has a DV IN/OUT connector. Because the signals are digital, there is no loss of video or audio quality as a result of editing.

A Make connections.

AIf the camcorder has no S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the recorder’s front panel AUDIO and VIDEO input connectors.

BIf the camcorder has an S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and S-VIDEO OUT connectors to the recorder’s front panel AUDIO and S-VIDEO input connectors.

CIf the camcorder has a DV IN/OUT connector ...

... connect the camcorder’s DV IN/OUT connector to

the recorder’s DV IN/OUT connector.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder’s instruction manual for operating procedure.

B Set the recorder’s input mode.

Press AUX (number key “0”) and/or PR to select “F-1”.

●When using the VHS deck as the recording deck, set “VHS F-1 INPUT” to “VIDEO” for the AUDIO/VIDEO input connectors,

or “S-VIDEO” for the AUDIO/S-VIDEO input connectors, depending on the connectors being used ( pg. 53).

C Select the recording deck.

Press VHS or DV.

●To edit from a camcorder to the VHS deck through the DV IN/ OUT connector, press .

●To edit from a camcorder to the DV deck through the S-VIDEO (VIDEO)/AUDIO input connectors, press .

D Set the edit mode. (VHS deck only)

See “PICTURE CONTROL” on page 68.

E Start the camcorder.

Engage the Play mode of the camcorder.

F Start the recorder.

Engage the Record mode of the recorder.

Image 48

JVC LPT0679-001A specifications Set the recorder’s input mode, Select the recording deck, Set the edit mode. VHS deck only

Contents

Video Cassette Recorder Do not place the recorder Do not expose the apparatus to dripping or splashing Some Do’s And Don’ts On The Safe Use Of Equipment Above ALL Front View Rear View Do not remove it PDC* Indicator pg Front Display Panel ON-SCREEN Display for VHS deck On the tape BeginningEnd Remote Control VHS How To Use Remote Control LCD Check Contents Recorder and the TV’s 21-pin Scart connector Situate the recorderConnect the recorder to TV Connect the recorder to mains 8To connect to a TV with S-VIDEO/AUDIO in connectors Aerial connectorVideo Connection Auto Set Up Perform Auto Set UpTurn on the recorder Before starting, make sure of the following Perform Preset Download Press rt to select CH - and press OK or eOn the on-screen display Just Clock pg , Just Clock NexTView Link TV Auto Power On Link FunctionsVCR Auto Standby Direct Rec Installing Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connections Setting satellite receivers brand and channel Select the satellite receiver’s channel for testing Check the result of the test Basic Playback VHS deck Choose a programme Set the tape speedStart recording Pause/Resume recording Slow Motion Pause during playbackActivate frame-by-frame playback High-Speed Turbo Search Variable Speed SearchIndex Search Skip Search Next Function Memory Repeat PlaybackActivate Repeat Playback Stop Repeat Playback Adjust the tracking manually Soundtrack SelectionManual Tracking Ntsc Playback Instant Timer Recording ITR Engage the ITR modeRecording Resume Function Accidental erasure prevention Reset the counter Tape Remaining TimeSet the counter display Press 0000 before starting recording or playback Engage the Record-Pause mode RetakeReceiving Stereo and Bilingual Programmes Locate the start point Playback Recording DV deck Select the DV deckPress DV Find the programme start point DV recording indicator turns off PLAYBACK/RECORDING on DV Deck For forward high-speed search During playback, turn the JOG dial quickly to the rightSearch, or 3 for reverse high-speed search During playback or still, press 5 for forward high-speed Recording Features Time Code See Audio REC on Access the PlusCode display Select the deckEnter the PlusCode number Transmit the PlusCode number Set the PDC mode Engage the recorder’s timer modeCheck the programme data Return to the normal screen Express Timer Programming Access the PlusCode screenAccess the Programme screen Enter the programme start time To Timer-Record Weekly Or Daily Serials PDC RecordingEnter the programme date Enter the channel position Enter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel For the VHS deckPage Disengage the timer mode Access the Programme screen/displayCancel or change a programme Return to the timer mode Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screen Tape Dubbing From DV to VHS Dubbing An Entire CassetteLoad cassettes Select the dubbing direction Dubbing direction indicator VHS lights From VHS to DV Dubbing An Entire CassettePress DV, then press SP/LP p From DV to VHS Locate the start point on the DV deckPrepare the VHS deck for dubbing Pause dubbing VHS playback indicator and DV recording indicator light From VHS to DVLocate the start point on the VHS deck Prepare the DV deck for dubbing Set the recorder’s input mode Select the recording deckSet the edit mode. VHS deck only Start the camcorder If the camcorder has no S-VIDEO output connector Simultaneous DubbingRecorder Video input Player Set the input mode of recording deck Another Video RecorderAdvantages of S-VHS video recorders Start the source player Recorder Another recorderPlayer Recorder Access the Main Menu screen Press rt to move Select Setting VHS F-1 Input SettingDecoder connector Select the input mode for the Video Video connector Audio Dubbing VHS Audio DubbingDV Audio Dubbing Pre-recorded tape Audio-dubbed tape CD player, etc Engage the Audio Dubbing mode End Audio DubbingPress A.DUB DV Insert Editing SP mode only Insert EditingVHS Insert Editing Source tape Engage the Insert Editing mode AV Insert Editing VHS deck onlyPrepare the recording cassette Start Editing Access the R.A.Edit screen Select the programmeInsert a VHS or S-VHS cassette and a Mini DV cassette Press R.A.EDIT. The R.A.Edit screen appears Locate the end point Prepare the source tapeStart Random Assemble Editing End Random Assemble Editing Change the remote control code Set the remote control codeDisplay the code Change the recorder’s code TV Multi-Brand Remote Control TV PR +/-, TV %+/- Volume, TV Muting, number keysSet the TV brand code Operate the TV Satellite Receiver Multi-Brand Remote Control Set the satellite receiver brand codeOperate the satellite receiver About DV IN/OUT connector To DV in connectorDigital printer Aerial ConnectorAerial Pin Scart connector Mains outletOutdoor unit Satellite cable Make connections FM tuner CD player Stereo amplifierAUX in or Tape Monitor Speaker Television Mode Set Access the Mode Set screenSelect the mode Select the mode setting Mode SET Powered back onScreen Control, or press 7 on the recorder VHS Mode SET VHS Mode SET Using this video recorder as the source player for editing Rental cassettesPicture reproduction is also linked to this function We recommend that you set Digital TBC/NR to on when DV Mode SET Tuner also by Preset Download pg Tuner SetAuto Channel Set Perform Auto Channel Set View the Confirmation screen Manual Channel Set Delete a Channel Change Station Channel PositionSelect the item Delete a channel Set Stations a Set Stations B Access the Manual Channel Set screen Perform tuningSelect the channel to fine-tune Press OK twice. The Manual Channel Set screen appears TV Station And ID List Station Name TV Station Channel Number Guide Access the Clock Set screen Clock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operation Video Plus+ System Setup Guide Program Number SetGuide Program Number Enter the Guide Program number No power is supplied to the recorder Connect the mains power cord Recording cannot be started There is no cassette loaded, orAdhesive tape, cover the hole where Tab removed Tab was removed VHS deck DV deck Turn off the recorder once and connect Not connected between TVTurn off the recorder or the connected Timer Recording PlaybackRecording Scan system Lines VHS Lines S-VHS Frequency range Hz to 10,000Hz to 20,000 Hz Hi-Fi audio Maximum recording time Auto Channel Set Auto Set Up Clock Set Connecting To a PrinterExpress Timer Programming Preset Download Random Assemble Editing Memo