Chapter 07
System
A detailed description of each function is provided. Refer to your product for details.
――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
USB Source Setup
This option is for assigning correct USB ports for HDMI and DP ports.
――You must assign a correct USB port for each input source to ensure that the USB Switch function works properly.
――When you assign a USB port, it is not necessary to press the JOG button for confirmation. If you select an item, it is applied immediately.
DisplayPort Ver.
Select your DisplayPort version.
――Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
――If the monitor is in HDMI/DisplayPort/USB
then select the 
icon. You can select 1.1 or 1.2↑.
HDMI Mode
Select the HDMI mode to use.
――The supportable device and resolution may differ depending on its version. ――When the version is changed, the screen may blink.
――If you set the HDMI Mode to 1.4, some high resolutions may not be supported because of bandwidth limitation of the HDMI 1.4 protocol.
――When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the device.
――Set the HDMI Mode to 1.4 when there is no sound output from the DVD connected to our product. ――Not available when PIP/PBP Mode is set to On.
41
