Samsung LC49J890DKUXEN manual Tidying Up the Connected Cables, Headphones hanger Downward Upward

Tidying Up the Connected Cables

: Headphones hanger

: Downward

: Upward

1 2 3

4 5

Connect the corresponding cables.	Arrange the cables against the bend	Push the COVER STAND BODY REAR in
	tendency of the cables and pull the	the direction as shown in the figure.
	cables out of the COVER-REAR SUB
	grooves.
6	7	8

Attach the COVER STAND BODY REAR in	Move down the COVER STAND BODY	Adjust the set height, if required.
the direction as shown in the figure with	REAR until it covers the stand neck
the buckles not being exposed.	completely.

Remove the COVER STAND BODY REAR by pulling it in the direction as shown in the figure.

Place the corresponding cables into the stand-neck holder. Do not stretch the cable. Three cables in one holder is recommended.

9

Hang the HOLDER-CABLE in the direction as shown in the figure.

10 11 12

Arrange the cables against their bend	Open the Headset Hanger by pushing it Hang the headset.
tendency, and then pull them through	down.
the HOLDER-CABLE hangers. When
the set height is changed, you need
to arrange the cables and pull them
through the HOLDER-CABLE hangers
again.

13

Rotate and then push up the Headset	Caution
Hanger in the directions as shown in the	Open the COVER-REAR SUB in the
figure.	direction as shown in the figure.

28