Samsung LC49J890DKIXCI, LC49J890DKUXEN manual Switch USB, Monitor, Mobile Phone, Laptop

Switch USB

PC

HDMI Cable

DP Cable

USB Cable

HDMI IN

DP IN

	Monitor
PC Screen		Laptop/Mobile Phone
		Screen

Mobile Phone

USB Type-C Cable

Laptop

USB Type-C Cable

The KVM (keyboard, video, and mouse) switch enables users to use only a keyboard, a video monitor, and a mouse for controlling multiple input sources. The function of the Samsung USB switch is as follows:

•• When PIP/PBP of a Samsung monitor is on, USB devices (I/O device, USB storage device, etc.) connected to the monitor can be switched between different input sources using the USB switch.

‒‒ Two different input sources must be connected to the monitor via source ports (HDMI, DP, USB-C#1, USB-C#2), and an upstream USB hub must be correctly connected to the monitor if required. ‒‒ You must connect USB devices to the Samsung monitor, enable PIP/PBP, and then correctly set up USB hub assignment in the OSD.

•• This function can be operated using the USB Switch Shortcut key or the USB Switch item in OSD.

――Each of USB-C#1 and USB-C#2 can be regarded as an upstream USB hub as well as an input source. Therefore, it is unnecessary to set up USB hub assignment for these two ports.

This option is for switching a USB device to a different input source.

――The option is disabled and appears dimmed if PIP/PBP is Off.

――When a USB device is switched to a source, information about the source including the USB hub port is displayed on the screen.

――The Keyboard and Mouse (KM) switch enables users to interact with and manage up to three input sources using a single mouse and keyboard.

――To prevent data damage or loss, make sure that, before performing Switch USB, no USB storage devices are being used by the input sources connected to the monitor.

37