JVC LST0728-001B Memo :, Note :, Memo :, Memo :, Configuring Event Buttons, 3 Click [Add new event...] to add the event button

Item	Description
D Polling	For some devices, the surveillance system
Frequenc	may need to check the status of their input
y[1/10sec]	ports in order to detect whether input has been
	received. These regular status checks are
	called ApollingB.
	The [Polling Frequency[1/10sec]] field enables
	you to specify the interval between status
	checks. Specify the interval in units of 1/10
	seconds.

Memo :

● For I/O devices, it is highly recommended that the polling frequency be shortened as much as possible.

● Refer to the “Instruction Manual” of the I/O device for devices that require polling.

Note :

●Do not alter these settings unless under special circumstances. Altering the setting unnecessarily may cause the system to malfunction. They need not be altered under normal circumstances.

Precautions during alteration

●When using event audio, the [Transfer port] of [Event Audio Setting]-[Communication setting] must coincide with the [Alert Port] number. (A Page 131)

●It is also necessary to set the [Alert Port] to a different number from the [Event receive port] of [Event Audio Setting]- [Communication setting]. (A Page 131)

Configuring Event Buttons

Event buttons are used to manually trigger events from the [Live Viewing] screen.

1 Click the [Event Buttons...] button on the [Camera Recording Administator] screen

[Event Buttons...]

[Camera Recording Administator] Screen

2 Select [Global] (apply to all cameras) or a specific camera3 Click [Add new event...] to add the event button

2

3

A

B

C

[Add New Event] Screen

	Item		Description
A Button related		Displays the camera name for which the
	to	event is specified. (This is a read-only
		field.)
B Manual event		For specifying a name for the event
	name	button.
		Memo :
		● The following characters cannot be
		used as part of the event name.
		< > & ^8217 ^8220 \ / : * ? [ ]
C E-Mail settings
	Send e-mail if this	Select this check box to send an e-mail
	event occurs	alert when the event button is clicked.
	Include image from	Select this check box to attach the
	camera	currently recorded images to the e-mail
		when the event button is clicked. Select
		a camera from the list below the check
		box.

Memo :

●To specify a timer event for an event, select the event added in Step 3, and click [Add new event...].

99