E Camera Type

For specifying whether the camera corresponding to the selected number is [Fixed] or [Moveable].

 

Fixed

: Fixed Camera

 

Moveable

: PTZ Camera

 

 

 

F Device Port

This option is enabled only if AMoveableB is selected in the [Camera Type] item E.

 

For specifying which control port on the network encoder (IP video server) to use for controlling the PTZ features.

 

 

 

G Port Addr.

This option is enabled only if AMoveableB is selected in the [Camera Type] item E.

 

Use this option to specify the port address of the camera. The port address is usually set to A0B or A1B.

 

If the PTZ cameras are serially connected, they are identified by their the port addresses. Refer to the camera’s

 

[INSTRUCRTIONS] for the recommended settings.

 

 

 

 

 

 

 

 

 

 

 

 

[CAMERA CONTROL] Terminal at the Rearof VR-N900U(VR-N900U)

The analog camera acts as a network encoder (IP video server) in the VR-N900Usystem, and the device name assigned to it is [N900]. The [CAMERA CONTROL] terminal at the rear is assigned as ACOM1B on the Camera Settings screen.

(A Page 88)

89