JVC LST0728-001B manual 83

 Other Settings

	Item	Preset Values		Description
B Day and Time Properties			To synchronize the time with the Internet time server or to specify the date and
			time manually, click [Update Now].
	Automatically	Select check box	Select this check box to synchronize the time with the Internet time server.
	synchronize with an	 Do not select	Note :
	Internet server	check box	● You cannot specify the date and time manually when this box is selected. The
			settings in the boxes cannot be changed.
			● The date and time properties are not enabled until you have clicked the
			[Update Now] button.
			● Changing the time setting may prevent normal playback of recordings made at
			the same time as a result.
			● Changing the ATimeB field of the time setting when operations are in progress
			may prevent normal display of live images. In this case, reboot this unit.
	Server	^	Enter the address of the Internet time server.
			Note :
			● Connect the time server to the LAN2 network.
	NTP Polling Interval	^	For specifying the time interval (in minutes) for synchronizing with the Internet
			time server.
	Date		Enter this field when you are specifying the date manually.
			Memo :
	Time
			● The [Day and Time Properties] settings are not enabled until you have clicked
			the [Update Now] button.
		^	● Changing the time setting may prevent normal playback of recordings made at
			the same time as a result.
			● Changing the AhourB value of the hour/minute/second setting when operations
			are in progress may prevent normal display of the live images. In this case,
			reboot this unit.
	Time Zone	 VR-1600U:	For specifying the time zone.
		(GMT-05:00)	Note :
		Eastern Time	● Make sure that the date and time that you specify does not overlap with any
		 VR-1600E:
			previous recorded data.
		(GMT) Greenwich	● If the specified time zone is incorrect, the system may not run at the correct
		Mean Time	time after synchronizing with the Internet time server.
			● When the time zone is altered, press the [LIVE/BROWSE] while holding down
			the [FUNCTION] button to reboot the NVR Viewer.
C Volume Properties
	Device Volume	 Center position	Adjust the volume using the slider bar.
D LOAD configuration		^	Reads the preset configuration files and displays them on the screen.
E SAVE changes		^	Exits after entries and the selected content are configured to the system.
			Manual update of time is disabled. To update the time manually, go to the [Day
			and Time Properties] item C.
F CANCEL changes		^	Exits without saving all entries and selected settings.

75