When “OK” button is pressed, following message will appear on the right bottom side of the screen:35/LVW(PSW\
Manual Search:
This is for searching for digital channels on a single broadcast frequency. The frequency channel number
Hint
The bar graphs of signal quality and signal level give a good indication of whether any channels are likely to be found. If only the signal level graph shows a high value then it is likely that an analogue channel occu- pies that broadcast frequency. If the signal quality bar is high as well then it is a digital frequency and digital channels will prob- ably be found.
Again, channels which duplicate those al- ready in the channel list are ignored. How- ever, the manual channel search will find all channels on the broadcast frequency.
When either search is finished, press the MENU key to return to normal broadcast viewing, to watch the new digital terrestrial television channels found.
Factory Settings:
To reset the TV, highlight the Factory Set- tings line in the menu and press OK. A
warning screen is displayed in case of acci- dental operation.
<HV | 1R |
Highlight the YES button with the “
” or “
” key and press OK to erase all the channels and settings. A message will be displayed on the screen.
2.
•Press the OK button to start the automatic search.
•When the automatic search has finished, the EDIT PR LIST menu appears.
Common Interface
It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broadcasting.
Obtain the Conditional Access Module (CAM) and the Viewing card by subscribing to a pay channel company, then insert those to the Television using the following proce- dure.
1.Switch off the TV and unplug from the mains.
2.Insert the CAM, then Viewing Card to the slot that is located in the terminal cover at the
•The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
3.Connect the TV to the mains supply, switch on and then wait for few mo- ments until the card is activated.
•Some CAMs may require the following set up. Please set the CAM by entering the DTV menu, Common Interface then pressing OK button. (CAM set up menu is not displayed when it is not required.)
- 26 -
