JVC LT-20DA6SK manual Vcr

• Press “ ” / “ ” or “OK” button on Store op- tion to store Install menu settings.

				Selecting Fine Tuning
				You can use the Fine Tuning process for
				fine adjustment (after coarse adjustment), if
				you are not happy about the image on the
				screen.
				Use “ ” or “ ” button on Fine Tuning item,
				until getting the best image on the screen.
				Selecting Search
				To start the search process, press “ ” but-
In EXT mode, Install menu appears like
				ton for forward search or “	” button for back-
this:
				ward search. If a signal is found or reaches
				to end of the band after searching, press
				“ ” or “ ” buttons to continue search pro-
				cess. To stop the search process when you
You can change only Colour system and				want, press “ ” or “ ” buttons at any time.
VCR.				Decoder (EXT-2)
Selecting Programme				You can use this mode to connect any de-
• U s i n g	“ ”	o r “	” b u t t o n s e l e c t	coder to your TV.
Programme.				• Press the “ ” or “ ” buttons to set it “On”
• To select programme number, you can use
				or “Off”.
“ ” / “	” button or Digit Buttons.			When you select Decoder (EXT-2) “On”,
Selecting Band				EXT-2 output will be chosen as TV mode
				only and any scrambled channels will be un-
Band, can be chosen either,
				scrambled through decoder connected your
• “C” or “S” by “		” or “ ”	button.	TV via EXT-2 output.
Selecting Channel				Setting VCR ( Video Cassette Recorder )
				Mode
Channel can be changed by “ ” or “ ” but-				• This item can be seen in TV, EXT-1, EXT-2,
ton or by Digit Buttons.
				EXT-2S, EXT-3, EXT-4 and EXT-4S modes.
Selecting Colour System				• If you want to watch a VCR source from one
Using “	” or “	” button on Colour System,		of these modes, then it will be better to set
				VCR mode “On”. For this, while the cursor is
you can change the colour system to PAL,				on this item press the “	” or “ ” buttons to
SECAM or Auto.
				set it “On”.
Note: In EXT mode, you can choose NTSC
				• If you want to watch a DVD, then you must set
3.58 and NTSC 4.43 as well.
				this item “off”; because DVD is not a source
Selecting Sound System				like a VCR and to see the picture better, you
Using “ ” or “ ” button on Sound System,				must set the VCR mode “Off”.
				To Store Settings
you can change the standard to BG, DK, I, L,
Lp.

- 31 -