JVC LT-20DA6SK manual Installation

Setting the favourite channels

If only channels that you often watch are set as favourite channels, you can choose from

just those channels by pressing /

.

•After setting the favourite channels, check the “Favourite Mode” in “Configuration” (see page 22) is set to ON.

1.Press the “ ” / “ ” buttons and choose Favourites on the bar at the bottom of the screen.

2.Press the “ ” / “ ” buttons and choose the channel to be registered as a favourite channel, and then press the OK button.

The favourite icon ( ) appears on the right side of the chosen channel.

When you leave the Channel List screen, by pressing “MENU” the channel showing on the quarter screen is selected for normal viewing on the whole screen.

Installation

Although your TV will not lose its settings or stored channels when switched off, you may wish to re-install the programs because you have moved to a different area with different broadcast frequencies, you wish to reinstate a channel previously deleted from the chan- nel list, or you want to watch new channels which have started broadcasting.

Display the DTV Menu and using the “ ” or

“ ” buttons, highlight the Installation line and press OK to display the Installation Menu.

The Installation menu appears.

You can either select Factory Settings, effec- tively resetting the receiver to its factory set- ting condition, or just search for channels.

Automatic Search:

The receiver can search for channels auto- matically (searching all the broadcast fre- quencies for free-to-air channels).

To perform Automatic search, Select Auto- matic Search with the “ ” or “ ” buttons and press OK. A warning message is dis- played.

<HV 1R

This starts the automatic tuning process and searches through all the available broadcast frequencies for free-to-air chan- nels.

%$&.

Previous channels will be replaced on auto- matic search.

If no digital terrestrial television broadcasts are found, the TV will display a message:

2.

- 25 -