Inserting batteries into the remote control
|
|
|
| If this symbol is shown, |
|
|
|
| |
When replacing the batteries |
| |||
| it is only valid in the | |||
To avoid |
|
|
| European Union. |
|
| |||
|
| |||
minus end of the batteries first.
●Batteries shall not be exposed to excessive heat such as direct sunshine, fire or the like.
●Read the precautions on the battery.
●The batteries last about 6 to 12 months on regular usage.
●The included batteries are supplied for operation check and may last shorter.
Attaching and connecting the speaker unit
Attach the supplied speaker unit under the monitor using the supplied screws.
●Refer to the startup sheet for details.
●You can also connect speakers other than the supplied one. In this case, set “PEQ” to “Off”. (➔ page 28)
Impedance: 8 Ω or larger
Rated input power: 10 W or larger
Screws (supplied)
Speaker unit (supplied)
Installation
Install the unit properly referring to the cautions from pages ii to vii.
●Do not hold the speaker unit when carrying the monitor. Hold the stand base and the upper part of the monitor by two or more people.
Installation
05
