Cannot turn on the monitor.
●Connect the power cord properly. (➔ page 10)
●Turn on the power switch. (➔ page 10)
The remote control does not work.
●Insert the batteries in the correct direction. (➔ page 05)
●Replace the batteries with new ones.
●Aim the remote control to the remote sensor on the monitor. (➔ page 11)
●The effective range of the remote control is about seven meters.
●Get closer to the monitor.
●Remove any obstruction between the remote control and the monitor.
No picture from a connected device.
●Select the correct input on the monitor.
●Connect the external device properly.
●Turn on the external device and start playback.
No sound.
●Check the speaker cord connection. (➔ page 05)
●Press the MUTE button (
).
●Check the amplifier connection.
●When “AMP” is selected under “Speaker”, the sound is output from the amplifier, and not from the speakers of the monitor. (➔ page 13)
No picture from HDMI devices.
●Select the correct input on the monitor.
●Use a cable marked with the HDMI logo.
●Please use a High Speed HDMITM Cable. High Speed HDMITM Cables are tested to carry an HD signal up to 1080p and higher. (➔ page 09)
Troubleshooting
39
