JVC LV42740-001A manual Getting started, Connections, Before making any connections, Unit

Getting started

Connections

*In the following description, “TV” may be substituted with “monitor” or “projector.” *Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.

To connect to a conventional TV

English

You can enjoy playback by simply connecting the unit to a TV. To improve audio sound quality, connect the AUDIO OUT jacks to your separate audio equipment. (See the following pages.)

The unit

AUDIO OUT

	CENTER	SUBWOOFER
DIGITAL OUT	REAR		VIDEO OUT		AV COMPU LINK
PCM / STREAM			VIDEO
COAXIAL OPTICAL	RIGHT	LEFT	COMPONENT
	FRONT
			Y	PB	PR
	RIGHT	LEFT

S-VIDEO

If the TV has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See “AV COMPU LINK remote control system” on page 67 for details.

Getting started

Red	S-video cable
White Yellow	(not supplied)

Audio/Video cable (supplied)

Yellow

White

Red

T V

IN

S-VIDEO

VIDEO

LEFT

AUDIO

RIGHT

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.

•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.

•If your TV has an S-video input, you can get better picture quality by connecting it with the S-VIDEO output of the unit using the S-video cable (optional) in addition to the (standard) video connection.

NOTES

•When connecting to a TV using the VIDEO OUT jack, make sure that the PROGRESSIVE indicator on the front panel is not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, see “How to make the Progressive scan mode active” on page 18.

•When making the audio connection using the FRONT (LEFT and RIGHT) jacks, set “DOWN MIX” in “PREFERENCE 2” to “Lo/ Ro” and the Speaker setting in “SPK. SETTING” to “2 CH.” (see page 60 and 62).

•Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.

17