Basic operations
Resuming playback
English
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later.
To memorize the interrupted position
¶During playback
Press 7, or press DVD STANDBY/ON 
on the remote control unit or STANDBY/ON 
on the front panel.
The unit memorizes the interrupted position.
“RESUME” appears in the display window for a few seconds.
•If you interrupt playback by pressing 7 and then turn off the power, the memory is not cleared.
To resume playback
¶While the disc you interrupt playback last time is still loaded in the disc tray
Press 3.
The unit starts playback from the position where you interrupted playback last time.
“RESUME PLAY” appears in the display window for a few seconds.
•To clear the resume position memory Carry out one of the followings.
*Open the carousel.
*Press 7 while stopped.
*Press any of the DISC buttons (1 through 7) on the front panel, or the DISC SELECT button followed by any of the 1 through 7 numeric buttons.
NOTES
•The resume function does not work with Audio CD and MP3 discs.
•In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier or later than the resume point you stored.
Basic operations
31
