JVC LV42740-001A manual This item controls Output signals when playing, Back DTS-encoded DVD, Mode

Initial settings

DTS BASS MANAGEMENT
This item controls the
output signals when playing	PREFERENCE1 PREFERENCE2 SPK. SETTING
back DTS-encoded DVD
	DIGITAL AUDIO OUTPUT	STREAM/PCM
VIDEO discs.	DOWN MIX	OFF
	COMPRESSION	OFF
	DTS BASS MANAGEMENT	OFF
	AUTO STANDBY	OFF
	SCREEN SAVER	MODE1
	AV COMPULINK MODE	DVD1

SCREEN SAVER English

A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu, is displayed for over 5 minutes.

PRESS KEY

• OFF

This is the normal setting for DTS-encoded discs.

Signals with the full frequency range are output from

all speakers when playing back a DTS-encoded disc.

This mode ignores all “Small” settings in the speaker

setting screen (All “Small” settings are regarded as

“Large”).

•MODE 1

The current picture gets dark.

•MODE 2

The “screen saver” picture appears and its brightness changes.

•OFF

PREFERENCE1	PREFERENCE2 SPK. SETTING
DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX		OFF
COMPRESSION		OFF
DTS BASS MANAGEMENT		OFF
AUTO STANDBY		OFF
SCREEN SAVER		MODE1
AV COMPULINK MODE		DVD1
PRESS	KEY

• ON

All speaker settings (front, center and rear) in the

speaker setting screen are effective when playing back

DTS-encoded discs. The low frequency signal fed

from the sub-woofer output is boosted up regardless

of the “Bass redirect setting” in the speaker setting

screen.

See page 62 for the speaker setting screen.

AUTO STANDBY

The screen saver function is off.

NOTES

• The monitor screen of a projector or projection TV is

easily burned out if a static picture is displayed for a

long time. Be careful not to allow the monitor screen to

be burned out when you set the SCREEN SAVER mode

to “OFF”.

• The TV screen may be garbled when you set the

SCREEN SAVER mode to “MODE 1”. In this case, set to

another mode.

When the unit is stopped for more than 30 minutes or 60 minutes, the unit enters standby mode automatically.

PREFERENCE1	PREFERENCE2		SPK. SETTING
DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX			OFF
COMPRESSION			OFF
DTS BASS MANAGEMENT			OFF
AUTO STANDBY			OFF
SCREEN SAVER			MODE1
AV COMPULINK MODE			DVD1
PRESS	KEY

• When a static picture is displayed for a long time

during playback, the screen saver function is always

activated in “MODE 1” regardless of whether you select

“MODE 1” or “MODE 2”.

AV COMPULINK MODE

•60

Time is set to 60 minutes.

•30

Time is set to 30 minutes.

•OFF

If you use the AV COMPU LINK system, you must set this item correctly.

Select from the three options: “DVD1”, “DVD2” and “DVD3” according to the equipment to be connected.

PREFERENCE1	PREFERENCE2		SPK. SETTING
DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX			OFF
COMPRESSION			OFF
DTS BASS MANAGEMENT			OFF
AUTO STANDBY			OFF
SCREEN SAVER			MODE1
AV COMPULINK MODE			DVD1
PRESS	KEY

The auto standby function is off.

See page 67.

Initial settings

61