English |
■Common Operations
| STANDBY | PHONES |
| indicator | |
|
| |
DISPLAY | AUX | VOLUME+,– |
| ||
|
|
AUX
BASS+ | TREBLE+,– |
|
AHB (ACTIVE | VOLUME+,– | ACTIVE HYPER |
| ||
HYPER BASS) |
| BASS PRO |
PRO |
|
|
Turning the Power On and Off
Turning the System On ——————
Press the 
button.
The display comes on and the STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in when the power was last turned off.
■For example, if the last thing you were doing was listening to a tape, you are now ready to listen to a tape again. If you wish, you can change to another source.
■If you were listening to the Tuner last, the Tuner comes on play- ing the station it was last set to.
CAUTION:
The Volume cannot be adjusted while the Unit is in Standby mode. DO NOT turn on the Unit and/or start playing any source without first setting the VOLUME control to 0, as a sudden blast of sound can damage your hearing, speakers and/or head- phones.
For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.
Be sure to turn down the volume before connecting or putting on headphones.
Turning the System Off ——————
Press the 
button again.
The STANDBY indicator lights up and the display is blank, except for the clock display.
■Some power (2.9W) is always consumed even though power is turned off (called Standby Mode).
■To switch off the Unit completely, unplug the AC power cord from the AC outlet (or, if using a car adaptor, unplug that from the unit). When you unplug the AC power cord, the clock will be reset to 0:00 immediately, and preset Tuner stations will be erased after about 24 hours.
Reinforcing the Bass Sound
You can reinforce the bass sound to maintain rich, full bass at low volume (you can use this effect only for playback):
To get the effect, press the ACTIVE HYPER BASS PRO button. The “BASS” indicator lights up on the display.
To cancel the effect, press the button again. The “BASS” indicator goes out.
Tone Control
You can control the tone by changing the bass and treble.
Adjusting the Volume
Press the VOLUME + button to increase the volume or press the VOLUME – button to decrease it.
You can adjust the volume level between 0 and 50.
BASS control ————————————
You can adjust the bass level (low frequency range level) between
To emphasize the bass level, press the BASS+ button on the
Remote Control.
To lower the bass level, press the BASS– button on the Remote Control.
6
