TREBLE Control ——————————
You can adjust the treble level (high frequency range level) between
To emphasize the treble level, press the TREBLE+ button on
the Remote Control.
To lower the treble level, press the TREBLE– button on the Re- mote Control.
Listening to Auxiliary Equip- ment
You can control the sound from auxiliary equipment played through the System, by applying the sound effects mentioned above.
■First make sure that the auxiliary equipment is properly con- nected to the System. (See page 4).
■1. Set the VOLUME control to 0. ■2. Press the AUX button.
When the System is in Standby mode, the Unit is automatically turned on and “AUX” appears on the display.
■ |
|
3. Start playing the auxiliary equipment. | English |
■ | |
4. Adjust the VOLUME control to the desired |
|
listening level. |
|
■ |
|
5. Apply sound effects, if you wish. |
|
To cancel Auxiliary mode |
|
You will automatically switch out of auxiliary mode when you start one of the System's
Showing the Time
To show the current time on the display, press the DISPLAY button on the Remote Control.
Note: You need to set the clock beforehand. (See “Setting the Clock” on page 16)
■Using the Tuner
|
| 4 |
|
| ¢ |
Number keys | AUTO PRESET | MULTI JOG dial |
| ||
| STEREO AUTO/MONO | TUNER/BAND |
|
| |
| TUNER/BAND | Band display, Frequency display, Preset channel |
| ¢ | |
|
|
4
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can listen to FM and AM(MW/LW) stations. Stations can be tuned in manually, automatically, or from preset memory storage.
■Before listening to the radio:
•Check that both the FM and AM(MW/LW) antennas are cor- rectly connected. (See page 3).
One Touch Radio —————————
Just press the TUNER/BAND button to turn on the Unit and start playing the station you were last tuned to.
■You can switch from any other sound source to the radio by pressing the TUNER/BAND button.
7
