JVC LVT0027-005A Connecting the Speakers, Connecting Auxiliary Equipment, Turntable or MD player

English

CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Connecting the Speakers

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.

1.	Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2.	Connect the red (+) and black (–) wires of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the System.
	Connect the red (+) and black (–) wires of the left side speaker to the red (+) and black (–) terminals marked LEFT on the Syst em.

Right speaker (rear side) Left speaker (rear side)

RIGHT LEFT

Black

1 2 3

CAUTION: A TV may display irregular colors if located near the speakers. If this happens, set the speak- ers away from the TV.

Connecting Auxiliary Equipment

Turntable (or MD player)

To listen to this source, press the AUX button.

R L

Signal cord (optional)

Pin-plug x 2

Turntable (with built-in equalizer) or MD player (optional)

Pin-plug x 2

AUX

Connecting the AC Power Cord

Firmly insert the supplied AC power cord into the AC inlet on the back of the System.

AC IN

Power cord

CAUTIONS:

•ONLY USE THE JVC POWER CORD PROVIDED WITH THIS UNIT TO AVOID MALFUNCTION OR DAMAGE TO THE UNIT.

•BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE UNIT IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.

Now you can plug the AC power cord into the wall outlet, and your System is at your command!

4