Using the Timers
STANDBY/ON
SLEEP
AUX
FM MODE FM /AM
CD1 CD2 CD3 CD
REPEAT | PROGRAM /RANDOM |
| |
|
| TAPE | TAPE |
|
| A/B |
|
SELECT | RDS MODE | DISPLAY MODE | |
SOUND |
|
| VOLUME |
MODE |
|
|
|
ACTIVE | SOUND | FADE |
|
BASS EX. | TURBO | MUTING |
|
SLEEP |
|
| ¢ |
CLOCK/TIMER |
|
SET | 4 |
DAILY Timer indicator
Timer indicator
REC (Recording) Timer indicator
SLEEP indicator
*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.
The timers lets you control recording and listening functions auto- matically.
Three types of timers are available:
DAILY Timer
Use this timer to set wake up everyday to music from any source, instead of an alarm clock.
REC (Recording) Timer
Unattended recording of radio broadcasts. You can set the starting time and ending time.
SLEEP Timer
Fall asleep and have your System turn off automatically after a certain length of time.
Setting the Clock
When you plug the AC power cord into the wall outlet, the time in- dication “0:00” blinks on the display.
You can set the clock whether the System is on or off.
•The clock must be correctly set for the timers to work.
•Each setting step must be completed within approx. two minutes. Otherwise, the setting is cleared and must be re- peated from the beginning.
•The clock may gain or lose one to two minutes per month.
Using the Unit
1 Press the CLOCK/TIMER button.
The hour digit of the time indication blinks on the display.
•If the clock is already set and “0:00” is not blinking, press the CLOCK/TIMER button repeatedly until clock setting
display appears on the display. (In the clock setting display, the hour digits of the current clock blink on the display. )
•If the clock is already set, the display changes as follows each time you press the CLOCK/TIMER button.
TIMER = ON time = REC = ON time = Clock setting display = Canceled = (back to the beginning)
2 Press the 4or ¢button to set the hour.
Pressing the ¢button moves the time forwards and pressing the 4 button moves it backwards. Holding down the button moves the hour rapidly.
3 Press the SET button.
The minute digits of the time indication blink on the display.
•To return to the hour setting, press the CANCEL button.
4 Press the 4 or ¢ button to set the minute.
5 Press the SET button.
“CLOCK OK” appears on the display. Then, the selected time is set and the seconds start counting from 0.
CAUTION:
•If there is a power failure, the clock loses its set- ting immediately. “0:00” blinks on the display and the clock must be reset.
23
