JVC CA-MXKA6, LVT1014-003A, 0303NYMCREBETEN manual Setting the REC Recording Timer, Using the Timers

Using the Timers

Preparation for each music source:

Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting mode.

When selecting TUNER FM or TUNER AM:

Press the ¢ or 4 button to select the preset station number, then press the SET button.

When selecting – CD – – :

Be sure to specify the disc number and the track number as fol- lows.

1.Press the ¢ or 4 button to select the disc number, then press the SET button.

Each time you press the button the disc number changes as follows:

– CD – – = 1 CD – – = 2 CD – – = 3 CD – – = (back to the beginning)

• If no disc number is specified, playback will start from the first track of the currently selected disc.

2.Press the ¢or 4button to select the track number, then press the SET button.

For example: 2 CD12 (Disc number 2, Track number 12) Set Daily timer CD2 after playing in CD2.

If you set Daily Timer to other CD number after playing CD2, it will not play back at the setting time.

•If no track number is specified, playback will start from the first track of the specified disc.

When selecting TAPE:

Insert a cassette tape you want to play into Deck A.

When selecting AUX:

Prepare the external equipment so that it will turn on at the ON time set by the System.

To allow this, the equipment should have the timer function.

6 Setting the volume level.

Press the ¢ or 4 button to select the volume level. VOL – – : The current volume level will be used.

VOL5, 10, or 15: When the timer is turned on, the Volume will be automatically set to the selected level.

7 Press the SET button.

The timer setting is completed, and “SET” and “OK” succes- sively appear on the display. Then the display returns to the display before you set the Timer.

8 Press the button to turn off the System.

The Timer indicator ( ) and “DAILY” indicator are lit on the display, showing that the Daily Timer is set to on.

To confirm / change the timer setting, repeat the setting pro- cedure from the beginning.

When the timer ON-time comes:

The following operation will be automatically repeated every day.

•When the timer ON-time comes, and the System automatically turns on. The music source you have set is played. The Timer

indicator ( ) blinks and “DAILY” indicator lights during timer operation.

•When the timer OFF-time comes, “OFF” blinks on the display just before the OFF-time and the System automatically turns

off. Then, the Timer indicator ( ) and “DAILY” indicator remain lit on the display.

•If the System is already on when the timer ON-time comes, the Daily Timer does not work.

Turning the Daily Timer On and Off

Once you have set the Daily Timer, it is stored in memory. So, the Daily Timer will be activated at the same time every day until it is canceled.

To cancel the Daily Timer temporarily:

1 Press the CLOCK/TIMER button on the Unit repeatedly until the “TIMER” appears on the display.

2 Press the CANCEL button on the Unit.

The “DAILY” indicator goes out and “OFF” appears on the display.

The Timer indicator ( ) goes out and the Daily Timer is can- celed temporarily.

To activate the cancelled Daily Timer:

1 Press the CLOCK/TIMER button on the Unit repeatedly until the “TIMER” appears on the display.

The “DAILY” indicator blinks and the Timer indicator ( ) lights up on the dispaly.

2 Press the SET button on the Unit.

“SET” and “OK” successively appear on the display. The Tim- er indicator ( ) and the “DAILY” indicator remain lit, and the display returns to the original display.

CAUTION:

•If the System is unplugged, or a power failure oc- curs, the timer setting will be lost in a few days. You will need to reset the clock first, then the timer.

Setting the REC (Recording) Timer

With the Recording Timer, you can make a tape of a radio broad- cast automatically whether or not you are home.

•You can set the REC Timer whether the System is on or off.

•The volume level is automatically set to MIN when REC Timer is used.

•Perform each setting within approx. 30 seconds. Other- wise, setting will be cleared and the procedure must be repeated from the beginning.

•If you have made a mistake while setting the timer, press the CANCEL button on the Unit. However, this does not al- ways cancel the current setting. If the CANCEL button does not work, press the CLOCK/TIMER button on the Unit repeatedly until the display returns to the original dis- play, and start from the first step.

25